SA1318WPC

Description

HORIZONTAL MITERING SAW

The Vision of Precision

5 H.P.
1-1/4” Blade
Heavy-Duty
Hydraulic
Metal Cutting

Add to Quote

resources

Download Brochure & Specification Sheet

features

Hydraulic Down Feed
- Feed rate and down pressure can be controlled for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
Hydraulic Shuttle Feed
- Length settings of 0-27.56” (0-700mm) are accomplished with simple programming at the operator’s touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is + .005” per index.
PC Programmable Control
- Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to ten jobs. Inputs include Part Length from 0-999.999” and the Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made.
Out-of-Stock Switch
- The machine will shut off automatically when the material is no longer present in the rear vise jaws, allowing for truly automatic operation.
Full Stroking Hydraulic Vise Jaws
- Hydraulic vices hold the work piece, providing accurate cuts and longer blade life.
Shuttle Vise
- The shuttle vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts. The remnant length is 9.5” (241 mm).

specifications

Model		SA1318WPC
Cutting Capacity	Round (Diameter) at 90°	13″	330 mm
	Round (Diameter) at 45°	11.8″	300 mm
	Round (Diameter) at 60°	7″	180 mm
	Rectangle (W x H) at 90°	13″ x 16″	330 x 405 mm
	Rectangle (W x H) at 45°	9.4″ x 13″	240 x 330 mm
	Rectangle (W x H) at 60°	7″ x 11″	180 x 280 mm
Work Load Capacity		4,400 lbs	1,996 kg
Saw Blade	Blade Size (L x T x W)	16′-4″ x 0.043″ x 1.25″	4960 x 1.1 x 34 mm
	Blade Speed	108-344 ft./min, by Inverter	33-105 m/min, by Inverter
	Tension Control	Hydraulic
Blade Control	Top Limit Setting	Bow height adjusting plate
Blade Control	Cutting Control	Hydraulic Pressure & Flow Control Valve
Vise Operation	Type	Front and Rear Vises and Vertical Vise
Vise Operation	Control	Hydraulic Full-Stroke Cylinder
Motors	Saw Blade	5 HP	3.75 kW
	Hydraulic Pump	1 HP	0.7 kW
	Cutting Fluid Pump	0.13 HP	0.1 kW
Power Requirement	Power Supply Voltage	AC230V±10%, 3 PH, 60 Hz, Voltage must be specified when ordering
Power Requirement	Power Requirement
Cutting Fluid	Tank Capacity	30.6 gal	116 liters
Hydraulic	Tank Capacity	5.8 gal	22 liters
Hydraulic	Pressure Setting	400 psi	2.8 MPa (28 kgf/cm²)
Chip Disposal		Chip Conveyor
Material Index	Index Mechanism	Shuttle Vise
	Stroke	27.6″	701 mm
	Length	0″-393.7″	0-10000 mm
	Number of Input Block	1-10
	Number of Cut-Off Pieces
	Remnant Length	9.25” for single part cutting 17.13″ for bundle cutting	235 mm for single part cutting 435 mm for bundle cutting
Machine Dimensions (W x L x H)		93.1″ x 81.6″ x 64.4″	2365 x 2072 x 1635 mm
Table Height (Above Floor)		34.5″	876 mm
Machine Weight		4,414 lbs	2,002 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.

Quote Request

SA1318WPC

Description

HORIZONTAL MITERING SAW

The Vision of Precision

resources

Download Brochure & Specification Sheet

features

specifications

Most Popular options

STAY CONNECTED WITH AMADA

Amada Machinery America, INC.

Products

Quick Links