Quote Request

No products in the cart.

THV800

Description

DUPLEX MILLING

The Vision of Precision

  • 2-Surfaces & 4-Surfaces Machining System
  • Clamping Force Adjustment Function
  • Hydraulic Clamping System
  • Chamfering Function
  • Standard Upper & Lower Jig
  • Screw Type Chip Conveyor (2 units)
  • Chip Box with Caster (1 unit)

resources

Download Brochure & Specification Sheet

features

  • Automatic Process to Milling Plate with a Twin Spindle Milling Machine
    1. Clamping the workpiece by the operator.
    2. Milling the 2 surfaces with 2 cutters at one time automatically.
    3. After milling 2 surfaces, index table is automatically rotated 90 degrees.
    4. Milling the 2 remaining surfaces automatically.

 


This means the twin spindle milling machine enables automatic milling of four surfaces with on one setting, reducing setting time, increasing efficiency and reducing running cost.


specifications

ModelTHV800
BodyIndex Table Size25.6″ x 25.6″650 x 650 mm
Max Longitudinal Travel (X-axis)47.2″  1200 mm
Max Cross Travel (Y&X-axis) 15.1″385 mm 
Distance from Spindle Nose to Table Center3.74″ – 18.90″ 95 – 480 mm 
Distance Between Both Spindle Nose 7.48″ – 37.80″ 190 – 960 mm
Distance from Table Surface to Spindle Center 18.90″ 480 mm
Index Table Driving Angle 0/45/90/135 Degree 0/45/90/135 Degree
 CapacityMax Material Dimensions (W x L x H)31.8″ x 31.8″ x 9.05″  810 x 810 x 230 mm
Max Machining Dimensions (W x L x H)31.5″ x 31.5″ x 9.05″ 800 x 800 x 230 mm 
Min Machining Dimensions (W x L x H)2.76″ x 2.76″ x 0.394″  70 x 70 x 10 mm
Chamfering SizeMax. C20: Square 5.90″- 21.6″Max. C20: Square 150-550mm
Face Mill Cutter DiameterDia. 9.84″Dia. 250 mm
Table Loading Capacity (Max Workpiece Weight)2645 lb1200 kg
Feed Speed
Rapid Feed Speed (X-Axis)65.6 ft/min20 m/min
Rapid Feed Speed (Y & Z-Axis)39.3 ft/min12 m/min
Cutting Feed Speed (Manual)0.039 – 59.05 in/min1 – 1500 mm/min
Cutting Feed Speed (Auto)0.039 – 196.85 in/min1 – 5000 mm/min
Handle Feed (Manual Pulse Generator)0.000039/0.00039/0.0039 in/1pulse0.001/0.01/ 0.1mm/ 1pulse
SpindleSpindle DiameterEquivalent to JIS No.50
Spindle NoseDia. 1.875″ Pilot Boss Resizable to
Dia. 2.362″ by Collar 
 Dia. 47.625 mm Pilot Boss Resizable to Dia. 60 mm by Collar 
Spindle Speed30-1000 RPM
Max Spindle Torque495 Nm

Motors

Spindle Motor15/10 HP11/7.5 kW
Feed Motor (X-Axis) 10 HP7 kW
Feed Motor (Y & Z-Axis) 5.5 HP x 24 kW x 2
Hydraulic Unit 7.5 HP5.5 kW
Chip Conveyor1/4 HP x 20.2 kW x 2
Lubrication Oil Pump1/40 HP0.018 kW
Machine Dimensions (W x L x H) 173.6″ x 179.7″ x 106.4″4410 x 4565 x 2702 mm 
Machine Weight 26455 lb 12000 kg
Hydraulic Oil Tank 26.4 gal100 litter 
Lubrication Oil Tank 0.47 gal 1.8 litter
Cutter Heeling 0.0012″/11.8″0.03/300 mm 
Air Pressure Requirement72.52 PSI and over, 79.25 gal/min and over 0.5 Mpa and over, 300 L/min and over 
Electric Power Requirement41 kVA, AC200/220V ±10%, 50/60Hz 

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

Additional Information

Resources

Specifications

Tab Title 2

Tab Title 3

Tab Title 4

Table Title 5

Request a Sample

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.