MSIW93D

Description

IRONWORKER

Strongest LED Lighting &
Best Stripper in the Industry

  • Heavy-Duty
  • Dual Cylinder
  • Completely Integrated
  • 93 Ton Capacity
  • 10 H.P.
  • 14” Throat
  • 5 Work Stations
  • Simultaneous Dual Operation

resources

Download Brochure & Specification Sheet

features

  • Five (5) Sets of Punches & Dies
    • Punches: 9/16″, 11/16″, 13/16″, 15/16″, 1-1/16″
    • Dies: 19/32″, 23/32″, 27/32″, 31/32″, 1-3/32″
  • LED Lighting at all Work Stations
  • Adjustable Electric Back Gauge (36″)
  • Scrap Boxes at Punching & Notching Stations
  • Adjustable Stroke Depth at Punch
  • Two (2) Full-Control Foot Pedals
  • Two (2) Hold Die Holders
  • Two (2) Piece Gauging Table at Punch Station
  • Keyed Punch Holder for Shaped Tooling

specifications

***All specifications are based on 65,000 PSI tensile strength material.

ModelMSIW93D
Work Stations5
PunchingPunching Pressure93Tons
Standard Tooling1-1/2″ x 3/4″
Large Tooling2″ x 9/16″
*Oversize Tooling4-5/16″ x 1/4″
Throat Depth14″
Stroke Length3-1/8″
Cycle/Min. (3/4″)25
Work Height42-1/2″
Flat Bar ShearingCapacity18″ x 9/16″
Width & Thickness14″ x 3/4″
Blade Length19″
Angle Flange Trim4″ x 1/2″
Work Height37″
 Angle Shear90°6″ x 6″ x 1/2″
45°3″ x 3″ x 5/16″
Work Height47-1/4″
Bar ShearingRound Bar2″
Square Bar2″ x 2″
**Channel Shear6″
**H Beams6″
**T Beams4″ x 7/16″
Work Height37″
NotchingRectangular Notcher2″ x 4″ x 1/2″
**Large V4″ x 4″ x 1/2″
Work Height37″
Special ToolingSingle V Bending Attachment10″ with 3″ wide V
Multi V Bending Attachment19-1/2″ with 1/2″, 3/4″, 1″, 1-1/4″ wide V

*Contact your Regional Sales Manager for more information.
**With special tooling only. (Measurements converted from metric units and may not be exact.)

***All specifications are based on 65,000 PSI tensile strength material.

Specifications and machine design may change without notice at the sole discretion of Amada’s Engineering Department.

options

  • V-Notcher at Notch Station
  • Single V Bending Attachment
  • Multi V Bending Attachment
  • Electric Back Gauge 6′
  • Channel Web Die Holder
  • Oversize Punching Kit
  • Channel Shear 3″ x 4.1″ lb/ft
  • Channel Shear 4″ x 5.4″ lb/ft

Additional Information

 

Specifications

Punching
Punch Pressure
93 tons
Punch Work Table
Includes gauge and adjustable stops.
Adjustable See-Through Punch Stripper
For fast and easy setup.
Die Holder
Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling
1-1/2" in 3/4"
CPD Series
26 punch, 62 die
Large Tooling
2" in 9/16"
CPD Series
26 punch, 62 die
Large Tooling
2" in 9/16"
CPD Series
SP51P PUNCH, SP80D die.
Optional Oversize Tooling
4-5/16" in 1/4"
Throat Depth
14"
Stroke Length
3-5/32"
Cycles per Minute in 3/4"
25
Punching Station Work Height
42-1/2"
‍ ‍
‍ ‍
Flat Bar Shearing
Flat Bar Shear Capacity
18" in 9/16"
Max. Width x Thickness
14" in 3/4"
Lower Blade
Four usable edges.
Support Table
Includes guides for accurate positioning and indicator lines at 30° and 45° left and right.
Adjustable Hold-Down
Holds work piece securely in position when shearing.
Upper Shear Blade
Provides for minimum distortion. Two usable edges.
Blade Length
19"
Angle Flange Trim
4-3/4"
Flat Bar Shear Work Height
37"
‍ ‍
‍ ‍
Angle Shearing
Maximum Capacity - 90°
6" x 6" x 9/16"
Maximum Capacity - 45°
3" x 3" x 5/16"
Shear Blades
Four usable edges.
Angle Shear Work Height
47-1/4"
‍ ‍
‍ ‍
Bar Shearing
Round Bar Maximum Capacity
2"
Square Bar Maximum Capacity
2" x 2"
Six Cavity Round Bar Shear Size
3/4”, 1-1/8”, 2”
Six Cavity Square Bar Shear Size
1-1/4”, 1, 2”
Channel Shear (optional)
6"
I-Beam Shear (optional)
6"
Bar Shear Work Height
47-1/4"
Notching
Rectangular Notcher
2" x 4" x 1/2"
Gauge Table with Stops
For precise positioning.
Notcher Work Height
37"
Other Standard Equipment
Five sets of Punches and Dies
Punches: 9/16", 11/16", 13/16", 15/16", 1-1/16"; Dies: 19/32", 23/32", 27/32", 31/32", 1-3/32"
CPD Series
26 punch, 62 die
Machine Net Weight
5200 lbs
Machine Dimensions
75" L x 39" W x 74" H
Single Phase Machines
N/A
Magnetic Base Work Light
Adjustable Electric Back Gauge (36")
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Two Full-Control Foot Pedals
Two Hole Die Holders
Two Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230/460 Volt, 3 Phase, 60 Hz

Options

Electric Back Gauge
6 ft. (in place of standard 3 ft.)
Channel Web Die Holders (CPD Series 55 Dies)
Used with 3” channel and larger
Channel Shear
3” x 4.1 lb. per foot
4” x 5.4 lb. per foot
5” x 6.7 lb. per foot
6” x 8.2 lb. per foot
208 Volt or 575V requires Buck Boost     
V-Notcher at Notcher Station (4” x4” in 1/2”)
Bending Single V (3” wide V; 10” wide material)
Bending Multi V (3/8”, 7/16”, 5/8”,15/16” wide V’s x 19-1/2” long)
Oversize Punching Kit 1-5/8” to 4-5/16” Diameter Holes
Optional Table for oversize punching 1-5/8” to 4-5/16”

Tab Title 3

Tab Title 4

Table Title 5

Request a Sample

STAY CONNECTED WITH AMADA

Contact for repair and recovery of AMADA products and our corporate activities.