Quote Request

No products in the cart.

MSIW66S

Description

IRONWORKER

Strongest LED Lighting &
Best Stripper in the Industry

  • Heavy-Duty
  • Completely Integrated
  • 66 Ton Capacity
  • 7-1/2 H.P.
  • 8” Throat
  • 5 Work Stations
  • Full Control Foot Pedal

resources

Download Brochure & Specification Sheet

features

  • Five (5) Sets of Punches & Dies
    • Punches: 9/16″, 11/16″, 13/16″, 15/16″, 1-1/16″
    • Dies: 19/32″, 23/32″, 27/32″, 31/32″, 1-3/32″
  • Magnetic Base Work Light
  • Adjustable Electric Back Gauge (36″)
  • Scrap Boxes at Punching & Notching Stations
  • Adjustable Stroke Depth at Punch
  • Two (2) Full-Control Foot Pedals
  • Two (2) Hold Die Holders
  • Two (2) Piece Gauging Table at Punch Station
  • Keyed Punch Holder for Shaped Tooling

specifications

ModelMSIW66S
Work Stations5
PunchingPunching Pressure66 Tons
Standard Tooling1-1/4″ x 5/8″
Large ToolingN/A
*Oversize ToolingN/A
Throat Depth8-5/8″
Stroke Length2-1/8″
Cycle/Min. (3/4″)25
Work Height41-1/4″
Flat Bar ShearingCapacity12″ x 916″
Width & Thickness8″ x 3/4″
Blade Length12-7/16″
Angle Flange Trim3″ x 3/8″
Work Height37-9/16″
 Angle Shear90°4″ x 4″ x 7/16″
45°3″ x 5/16″
Work Height45-1/2″
Bar ShearingRound Bar1-1/2″
Square Bar1-3/8″ x 1-3/8″
**Channel Shear3″
**H Beams3″
**T Beams3″ x 5/16″
Work Height45-1/2″
NotchingRectangular Notcher1-5/8″ x 3-15/16″ x 3/8″
**Large V4″ x 4″ x 3/8″
Work Height41-9/16″
Special ToolingSingle V Bending Attachment4″ with 2-1/2″ wide V
Multi V Bending AttachmentN/A

*Contact your Regional Sales Manager for more information.
**With special tooling only. (Measurements converted from metric units and may not be exact.)

Specifications and machine design may change without notice at the sole discretion of Amada’s Engineering Department.

options

  • V-Notcher at Notch Station
  • Single V Bending Attachment
  • Multi V Bending Attachment
  • Electric Back Gauge 6′
  • Channel Web Die Holder
  • Oversize Punching Kit
  • Channel Shear 3″ x 4.1″ lb/ft
  • Channel Shear 4″ x 5.4″ lb/ft

Additional Information

 

Specifications

Punching
Punch Pressure
66 tons
Punch Work Table
Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper
For fast and easy setup. With electronic safety interlock.
Die Holder
Adjustable for quick punch and die alignment.
Standard Tooling
1-1/4" x 5/8"
Oversize Tooling
1-1/2" x 3/8"
Throat Depth
9-7/16"
Stroke Length
1-5/32"
Cycles per Minute in 3/4"
22
Punching Station Work Height
41-5/16"
Flat Bar Shearing
Flat Bar Shear Capacity
12" x 9/16"
Lower Blade
Four usable edges.
Support Table
Includes guides for accurate positioning and indicator lines at 30, 45 and 90 degrees left and right.
Upper Shear Blade
Provides for minimum distortion
Blade Length
13-13/16"
Flat Bar Shear Work Height
31-7/8"
Angle Shearing
Max. Capacity - 90 Degrees
4" x 4" x 3/8"
Shear Blades
Four usable edges.
Angle Shear Work Height
45-1/2"
Bar Shearing
Max. Round Bar Capacity
1-1/2"
Max. Square Bar Capacity
1-3/8"
Four Cavity Round and Square Bar Shear Sizes
Round - 1/8", 1 1/2"; Square - 5/8", 1 1/2"
Channel Shear Max
3"
H-Beam Shear Max
3"
Notching
Rectangular Notcher
2" x 3-1/2" x 5/16"
Notcher Work Height
41-3/4"
Cover equipped with electronic safety lock
Gauge table with stops
Other Standard Equipment
Five Sets of Punches and Dies
Punches: 9/16", 11/16", 13/16", 15/16", 1-1/16"; Dies: 19/32", 23/32", 27/32", 31/32", 1-3/32".
CPD Series
20 punch, 55 die.
Machine Shipping Weight
2,900 lbs.
Machine Dimensions
47" L x 36" W 68" H
Magnetic Base Work Light
Scrap Boxes at Punching and Notching Stations
Hydraulic Hold-Downs at Shearing Station
Adjustable Back Gauge-Electric (3')
Adjustable Stroke Depth at Punch Station
Full-Control Foot Pedals
Two Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230/460 Volt, 3 Phase, 60 Hz

Options

Electric Back Gauge
6 ft. (in place of standard 3 ft.)
Channel Web Die Holder (CPD Series 55 Die)
used with 3” channel and larger
Channel Shear
3” x 4.1 lb. per foot
208 Volt or 575 Volt requires Buck Boost
220-1-60 Volt, requires purchase of a phase converter and 60 amp service
V- Notcher, 3-1/2” x 3-1/2” in 5/16”
Bending attachment Single V Max. 2-1/2"
Angle Bending (2-1/2” x 5/16”)
Large Hole Punch 2.01” to 3.94”
Pipe Notcher Kit

Tab Title 3

Tab Title 4

Table Title 5

Request a Sample

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.