Quote Request

No products in the cart.

MSIW126D/DX

Description

IRONWORKER

Strongest LED Lighting &
Best Stripper in the Industry

  • Heavy-Duty
  • Dual Cylinder
  • Completely Integrated
  • 126 Ton Capacity
  • 15 H.P.
  • D 14” Throat
  • DX 24″ Throat
  • 5 Work Stations
  • Simultaneous Dual Operation

resources

Download Brochure & Specification Sheet

features

  • Five (5) Sets of Punches & Dies
    • Punches: 9/16″, 11/16″, 13/16″, 15/16″, 1-1/16″
    • Dies: 19/32″, 23/32″, 27/32″, 31/32″, 1-3/32″
  • Magnetic Base Work Light
  • Adjustable Electric Back Gauge (36″)
  • Scrap Boxes at Punching & Notching Stations
  • Adjustable Stroke Depth at Punch
  • Two (2) Full-Control Foot Pedals
  • Two (2) Hold Die Holders
  • Two (2) Piece Gauging Table at Punch Station
  • Keyed Punch Holder for Shaped Tooling

specifications

ModelMSIW126D/DX
Work Stations5
PunchingPunching Pressure126 Tons
Standard Tooling1-1/2″ x 1″
Large Tooling2″ x 3/4″
*Oversize Tooling4-5/16″ x 5/16″
Throat DepthD: 14″
DX: 24″
Stroke Length3-1/8″ 
Cycle/Min. (3/4″)25
Work Height43-3/4″
Flat Bar ShearingCapacity14″ x 1″
Width & Thickness24″ x 9/16″
Blade Length24″
Angle Flange Trim5″ x 5/8″
Work Height37″
 Angle Shear90°6″ x 6″ x 5/8″
45°3″ x 3″ x 3/8″
Work Height48″
Bar ShearingRound Bar2″
Square Bar2″ x 2″
**Channel Shear7″
**H Beams7″
**T Beams5″ x 1/2″
Work Height37″
NotchingRectangular Notcher2-38″ x 4″ x 1/2″
**Large V4″ x 4″ x 1/2″
Work Height37″
Special ToolingSingle V Bending Attachment10″ with 3″ wide V
Multi V Bending Attachment27-1/2″ with 1/2″, 3/4″, 1″, 1-1/4″ wide V

*Contact your Regional Sales Manager for more information.
**With special tooling only. (Measurements converted from metric units and may not be exact.)

Specifications and machine design may change without notice at the sole discretion of Amada’s Engineering Department.

options

  • V-Notcher at Notch Station
  • Single V Bending Attachment
  • Multi V Bending Attachment
  • Electric Back Gauge 6′
  • Channel Web Die Holder
  • Oversize Punching Kit
  • Channel Shear 3″ x 4.1″ lb/ft
  • Channel Shear 4″ x 5.4″ lb/ft

Additional Information

 

Specifications

Punching
Punching Pressure
126 Tons
Punch Work Table
Includes back gauge and adjustable stops
Adjustable See-Through Punch Stripper
For fast and easy setup.
Die Holder
Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling
1-1/2" in 1" material
Large Tooling
2" in 3/4"
CPD Series
SP51P punch, SP80D die
Optional Oversize Tooling
4-5/16" in 5/16" material
Throat Depth
14” (D); 24” (DX)
Stroke Length
3-1/8”
Cycles per Minute in 3/4"
25
Punching Station Work Height
43-3/4”
Flat Bar Shearing
Flat Bar Shear Capacity
14” in 1”
Maximum Width x Thickness
24” x 9/16”
Lower Blade
Four usable edges
Support Table
Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right,
Adjustable Hold-Down
Holds work piece securely in position when shearing.
Upper Shear Blade
Provides for minimum distortion. Two usable edges.
Blade Length
24"
Angle Flange Trim
5" in 5/8"
Flat Bar Shear Work Height
37"
Angle Shearing
Max. Capacity - 90 degrees
6" x 6" x 5/8"
Max. Capacity - 45 degrees
3" x 3" x 3/8"
Shear Blades
Four usable edges
Angle Shear Work Height
48"
Bar Shearing
Round Bar Capacity
2”
Square Bar Capacity
2” x 2"
Six Cavity Round Bar Shear Size
3/4", 1-1/2", 2"
Six Cavity Square Bar Shear Size
1-1/4" to 2"
Channel Shear
7"
I-Beam
7"
Bar Shear Work Height
48"
Notching
Rectangular Notcher
2-3/8" x 4" x 1/2"
Gauge Table with Stops
For precise positioning
Notcher Work Height
37"

Options

Electric Back Gauge
6 ft. (in place of standard 3 ft.)
Channel Die Holder Used with 3” channel and larger(CPD 55 Dies)
Includes overhang for channel leg punching
Channel Shear
3” x 4.1 lb. per foot
4” x 5.4 lb. per foot
5” x 6.7 lb. per foot
6” x 8.2 lb. per foot
208 or 575 Volt requires Buck Boost
V-Notcher at Notcher Station, (4” x 4” in 1/2”)
Bending Attach Single V (3” wide V; 10” wide material)
Bending  Multi V (3/8”,7/16”,5/8”,15/16” wide V’s x 19-5/8” long)
Hydraulic Punch Stripper (Special Order)
Oversize Punching Kit 2-1/4" to 4-5/16” Diameter Holes
Optional Table  for oversize punching 2-1/4"” to 4-5/16"

Warranty

AMADA MARVEL, INC. warrants to the original user for a period of two (2) years on replacement parts and one (1) year labor.  We warrant from date of factory shipment that every new Spartan Circular Saw is free from defect in material and workmanship.  During that period, we will at our option, repair or replace any part which, upon examination, we find defective.  This warranty will not apply to alterations or modifications made upon Spartan Circular Saws without our written consent or to machines that have been subject to willful abuse.

Tab Title 4

Table Title 5

Request a Sample

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.