Close this search box.

Quote Request

No products in the cart.




Pulse Cutting Technology
for Higher Cutting Rates

  • 15 HP
  • 2-5/8″ Blade
  • Hydraulic Flow Cutting Control with Stepping Motor
  • Windows Based CNC Controls


Download Brochure & Specification Sheet


  • Pulse Cutting
    • Single pulse cutting cancels the vibrations that occur during the penetration force. This technology decreases cutting resistance while increasing blade life and cutting rates. Increased blade life is now guaranteed without sacrificing productivity.
  • Increased Blade Life without Sacrificing Productivity
    • By controlling vibrations that occur during the penetration force, pulse cutting reduces cutting resistance and blade wear in half. Lower tooling cost is ensured by the extended blade life.
  • Automatic Dual Wire Brush System
    • The dual wire brushes contact the sides of the blade at the teeth, instantly cleaning the gullet area and avoiding excessive brush wear due to improper settings.


Cutting CapacityRound (Diameter)11.4″ – 28.3″290-720 mm
Rectangle (W x H)32.0″ x 28.0″815 x 715 mm
Work Load Capacity17,640 lbs8,000 kg
Blade Size (L x T x W)27’3″ x 0.063″ x 2-5/8″8300 x 1.6 x 67 mm
Blade Speed49-361 ft/min by Inverter15-110 m/min by Inverter
Blade ControlTop Limit SettingAutomatic Setting with Photo Sensor
Cutting ControlWindows Based CNC Control, Hydraulic Flow Control Valve with Stepping Motor
Vise Operation

Type Front and Rear Vise
ControlWindows Based CNC Control, Hydraulic Flow Control Valve with Stepping Motor


Saw Blade15 HP11 kW
Hydraulic Pump5 HP3.7 kW
Cutting Feed AC Servo1/8 HP0.09 kW
Wire Brush1/2 HP0.25 kW
Cutting Fluid Pump1/4 HP0.2 kW
Power RequirementPower Supply VoltageAC220V±10%, 3 PH, 60 Hz
All Other Voltages Require Transformer
Power Requirement25 kVA
Cutting FluidTank Capacity52.8 gal200 liters
Pump TypeCentrifugal Electric 
Pump Capacity5.3 gal/min20 L/min

Tank Capacity8 gal30 liters
Pump TypeVariable Displacement Vane Pump
Pressure Setting814 psi5.8 MPa (58 kgf/cm2)
Chip DisposalChip Conveyor
Material Index

Index MechanismShuttle Vise
Stroke19.685″500 mm
Length0.787″ – 393.70″20-9999.9 mm
Number of Input Block/Station1-99
Number of Cut-Off Pieces1-9999
Remnant Length1.57″ Plus Length of Parts40 mm Plus Length of Parts
Machine Dimensions (W x L x H)Head-Up Position172.7″ x 85.9″ x 108.9″4387 x 2181 x 2813 mm
Head Down Position172.7″ x 85.9″ x 108.9″4387 x 2181 x 2765 mm
Table Height27.6″700 mm
Machine Weight17,640 lbs8000 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.


  • Kicker Type Carrying-In System (only for round material)
  • RT Conveyor
  • Driving Conveyor Type Carrying-Out System
  • Product Sorting Carrying-Out System
  • Separately Placed Chip Conveyor
  • Mist Collector


Contact for repairand recovery of AMADA products and our corporate activities.