Close this search box.

Quote Request

No products in the cart.




Pulse Cutting Technology
for Higher Cutting Rates

  • 15 HP
  • 2″ Blade
  • 3D Automatic Adjusting Wire Brush
  • Cutting Feed Controlled by Servo Motor
  • Windows Based CNC Controls


Download Brochure & Specification Sheet


  • Pulse Cutting
    • Single pulse cutting cancels the vibrations that occur during the penetration force. This technology decreases cutting resistance while increasing blade life and cutting rates. Increased blade life is now guaranteed without sacrificing productivity
  • 3D Self-Adjusting
  • Wire Brush
  • Blade Deviation Monitor
  • Inverter Blade Speed Change
  • Cutting Control by
  • Hydraulic Flow
  • Control Valve with Stepping Motor
  • Cutting Fluid Level Detector
  • Motion Detector
  • Large Area Chip Conveyor
  • Windows Based CNC Controls
  • Auto Trim Cut Function
  • Full Stroke Vise
  • Quick Approach
  • Split Front Vise
  • Work Light
  • Back Gauge Stopper
  • Vibration Prevent Roller


Cutting CapacityRound (Diameter)1.18″ – 16.93″30 – 430 mm
Rectangle (W x H)16.93″ x 16.93″430 x 430 mm
Work Load Capacity6,613 lbs3,000 kg
Saw Blade
Size (L x T x W)20′ x 0.063″ x 2″6100 x 1.6 x 54 mm
Blade Speed49-394 ft/min by Inverter15-120 m/min by Inverter
Tension ControlHydraulic
Blade Control

Top Limit SettingAutomatic Setting with Quick Approach Feeler
Cutting ControlPCSAW430X:
Windows Based CNC Control, Hydraulic Flow Control Valve with Stepping Motor

Windows Based CNC Control,
Servo Motor with Ball Screw

Vise Operation

TypeMain Split Vise and Rear Vise
ControlHydraulic Full-Stroke Cylinder
MotorsSaw Blade15 HP11 kW
Hydraulic Pump3 HP2.2 kW
Pulse Cutting1/8 HP0.09 kW
Wire Brush1/2 HP0.2 kW
Cutting Fluid Pump1/2 HP0.25 kW
Power RequirementPower Supply VoltageAC220V±10%, 3 PH, 60 Hz All Other Voltages Require Transformer
Power RequirementPCSAW430X: 25 kVAPCSAW430AX: 26 kVA
Cutting Fluid

Tank Capacity47.3 gal179 liters
Pump TypeCentrifugal Electric Pump
Pump Capacity5.3 gal/min20 L/min

Tank Capacity7.34 gal28 liters
Pump TypePiston Pump
Pressure Setting597.4 psi4.2 MPa (42 kgf/cm2)
Chip DisposalBuilt-In Wide Scraper Style Chip Conveyor
Material Index

Index MechanismShuttle Vise
Stroke19.685″500 mm
Length0.394″-393.70″10-9999.9 mm
Number of Input Block1-99
Number of Input Station1-99
Number of Cut-Off Pieces1-9999
Remnant Length3.94″ plus length of parts100 mm plus length of parts
Machine Dimensions (W x L x H)
Head Up Position
112.2″ x 83.2″ x 89.6″2850 x 2113 x 2276 mm
Head Down Position
112.2″ x 83.2″ x 79.6″2850 x 2113 x 2023 mm
Head Up Position
112.2″ x 83.2″ x 100.0″ 2850 x 2113 x 2285 mm
Head Down Position
112.2″ x 83.2″ x 100.0″ 2850 x 2113 x 2285 mm
Table Height (Above Floor) 27.6″700 mm
Machine Weight10,361 lbs4,700 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.


  • Kicker Type Carrying-In System (only for round material)
  • RT Conveyor
  • Driving Conveyor Type Carrying-Out System
  • Product Sorting Carrying-Out System
  • Separately Placed Chip Conveyor
  • Mist Collector


Contact for repairand recovery of AMADA products and our corporate activities.