Close this search box.

Quote Request

No products in the cart.




Pulse Cutting Technology
for Higher Cutting Rates

  • 5 HP
  • 1-1/2″ Blade
  • Auto Trim Cut Function
  • SmartCut Band Saw Blade Spec


Download Brochure & Specification Sheet


  • High Speed Cutting
    • The pulse cutting technology reduces cutting resistance thereby minimizing blade teeth wear and increasing cutting rates.
  • High Rigid Structure
    • The post-type construction gives higher rigidity than the hinge type.
  • Full Cover
    • The introduction of a full cover design prevents scattering of chips and cutting oil to ensure a better work environment.
  • SMARTCUT BAND as a Standard Equipment


Model PCSAW330
Cutting Capacity Round (Diameter) 1.18″ – 13″ 30-330 mm
Rectangle (W x H) 13″ x 13″ 330 x 330 mm
Work Load Capacity 4,410 lbs 2000 kg
Saw Blade Blade Size (L x T x W) 13’6″ x 0.035″ x 1-1/2″ 4115 x 0.9 x 41 mm
Blade Speed 49-394 ft/min by Inverter
Speed Change
15-120 m/min by Inverter
Speed Change
Tension Control Hydraulic
Blade Control
Top Limit Setting Automatic Setting with Quick Approach Feeler
Cutting Control Hydraulic Pressure & Flow Control Valve
Vise Operation Type  Main Split Vise and Rear Vise
Control  Hydraulic Full-Stroke Cylinder
Motors Saw Blade 5 HP 3.7 kW
Hydraulic Pump 2 HP 1.5 kW
Pulse Cutting 1/4 HP 0.2 kW
Cutting Fluid Pump 1/4 HP 0.18 kW
Power Requirement Power Supply Voltage AC220V±10%, 3 PH, 60 Hz All Other Voltages Require Transformer
Power Requirement 13 kVA
Cutting Fluid Tank Capacity 16.9 gal 64 liters
Pump Type Centrifugal Electric Pump
Pump Capacity 26.4 gal/min 100 L/min
Tank Capacity 8.7 gal 33 liters
Pump Type Variable-Discharge Vane Electric
Pump Capacity 6.9 gal/min 26 L/min
Pressure Setting 498 psi 3.5 MPa (35 kgf/cm2)
Chip Disposal Chip Conveyor
Material Index

Index Mechanism Shuttle Vise
 Stroke 19.685″ 500 mm
 Length 0.394″-999.99″ 10-9999.9 mm
 Number of Input Station 1-99
Number of Cut-Off Pieces 1-9999
Remnant Length 2.283″ plus length of parts 58 mm plus length of parts
Machine Dimensions (W x L x H) Head-Up Position 85.6″ x 99.6″ x 74.4″ 2175 x 2530 x 1891 mm
Head Down Position 85.6″ x 99.6″ x 74.4″ 2175 x 2530 x 1891 mm
Table Height 27.6″ 700 mm
Machine Weight 3,970 lbs 1800 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.


  • Roller Table 6.5′
  • Roller Table 10′
  • Vise Pressure Control
  • Signal Tower


Contact for repairand recovery of AMADA products and our corporate activities.