Quote Request

No products in the cart.

HKB6050CNC

Description

HORIZONTAL STRUCTURAL BUNDLE SAW

CNC Controlled, Full Capacity,
Dual Post with Canted Head

  • 7.5 H.P.
  • 2″ Blade
  • Auto Trim Cut Function
  • Full Capacity Bundle Vises
  • Vise Pressure Control Valve

resources

Download Brochure & Specification Sheet

features

  • High Productivity
    • High Speed and High Accuracy Cutting
    • Spray Mist Coolant (Optional)
    • Cleaner Work Place
    • Cleaner Cut Pieces
    • Eliminate Improper Mixing Ratios
  • Full Capacity Bundle Vises
    • Clamps on Both Sides and Top
    • Handles Structural, Profiles, or Solids
  • Rear Indexing Vise
    • 78-inch Single Stroke Indexing
    • Single Direction Index on Short Pieces
    • Constant Clamping Maintains Bundle Configuration
  • Front Pulling Vise
    • 23 Inches per Single Stroke
    • Minimal Remnant
    • Clamping on Both Sides of Blades
  • CNC Control
    • 30 Blocks, 10 Stations per Block
    • Self-Diagnostics by Error Codes
    • Feeds and Speed by Material Type

specifications

ModelHKB6050CNC
Cutting CapacityRound (Diameter)1″ – 20″25-500 mm
Rectangle (W x H)1″ x 1″ – 24″ x 20″25 x 25 mm – 600 x 500mm
Work Load Capacity9,923 lbs4,500 kg
Saw BladeBlade Size (L x T x W)19.4″  x 0.050″ x 2″5890 x 1.3 x 54 mm
Blade Speed49-325 ft/min by Inverter15-100 m/min by Inverter
Tension ControlHydraulic
Blade ControlTop Limit SettingAutomatic Setting with Quick Approach Feeler
Cutting ControlCNC Control, Hydraulic Flow Control Valve with Stepping Motor
Vise Operation

Type Front, Main and Rear Vises
ControlHydraulic Full-Stroke Cylinder

Motors

Saw Blade7.5 HP5.5 kW
Hydraulic Pump2 HP1.5 kW
Cutting Fluid Pump1/4 HP0.18 kW
Power RequirementPower Supply VoltageAC220V±10%, 3 PH, 60 Hz
Power Requirement11 kVA
Cutting FluidTank Capacity38.3 gal145 liters
Pump TypeElectric 
Hydraulic


Tank Capacity12.2 gal46 liters
Pump TypeVariable Displacement Vane Pump
Pressure Setting570 psi4 MPa (40 kgf/cm2)
Chip DisposalChip Conveyor
Material Index





Index MechanismShuttle Vise
Stroke78.7″2000 mm
Length*0.394″ – 999.9999″*10-9999.9 mm
Number of Input Block/Station1-30 / 1-10 per block
Number of Cut-Off Pieces1-999
Remnant Length0.6″ Plus Length of Parts15 mm Plus Length of Parts
Machine Dimensions (W x L x H)Head-Up Position169.8″ x 226.1″ x 91.7″4312 x 5742 x 2330 mm
Head Down Position169.8″ x 226.1″ x 91.7″4312 x 5742 x 2330 mm
Table Height28.8″730 mm
Machine Weight15,215 lbs6,900 kg

*Automatic positioning cannot be performed when the cutoff length is less than 1.2″ (30 mm).
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

options

  • Light Beam Marking

Additional Information

Resources

Specifications

Tab Title 2

Tab Title 3

Tab Title 4

Table Title 5

Request a Sample

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.