Quote Request

No products in the cart.

S330/3HV

Description

HORIZONTAL MITERING SAW

The Vision of Precision

  • 3 H.P.
  • 1″ Blade
  • Swivel Head
  • High Speed
  • Horizontal
  • Metal Cutting
  • 60° Miter Cutting
  • Hydraulic Vise

resources

Download Brochure & Specification Sheet

features

  •  Hydraulic Down Feed
    • Infinitely variable feed rate is hydraulically controlled for fast, accurate cutting. Settings are made at the operator’s control station. 
  •  Hydraulic Auto Frame Return
    • The saw frame will automatically raise hydraulically at the end of a saw cut. The saw frame can also be lifted hydraulically with the push button switch.
  • Chip Brush
    • Powered from the drive wheel of the saw, the brush changes speed with the blade to assure that chips are being removed from each gullet, improving cutting performance and blade life. 
  • Vise Jaw
    • Hydraulic rack and pawl vise design clamps and holds the work piece securely. The vise is operated by a selector switch located on the operator’s control panel. 
  • Swivel Miter
    • The saw frame swivels a full 60 degrees to the rear and 45 degrees to the front for optimum miter cutting capability. Stops are provided at -60 and +45 degrees.

specifications

ModelS330/3HV
Cutting Capacity Round (Diameter) at 90°13″ 330 mm
Round (Diameter) at ± 45°13″330 mm
Round (Diameter) at − 60°8.7″220 mm
Rectangle (W x H) at 90°18″ x 12″460 x 300 mm 
Rectangle (W x H) at ± 45°12″ x 12″305 x 305 mm
Rectangle (W x H) at − 60°11″ x 8″280 x 203 mm
Work Load Capacity  
Saw BladeBlade Size (L x T x W)13’6″ x 0.035″ x 1″ 3885 x 0.9 x 27 mm 
Blade Speed60-330 ft/min by Inverter18-100 m/min by Inverter 
Tension ControlManual 
Blade ControlTop Limit SettingManual Setting 
Cutting ControlHydraulic Flow Control Valve 
Vise Operation

Type  Single Vise
ControlAdjustable Hydraulic Vises 

Motors

Saw Blade3 HP2.2 kW
Hydraulic Pump1/2 HP0.37 kW
Cutting Fluid Pump1/8 HP0.06 kW
Power RequirementPower Supply VoltageAC230V±10% or AC460V±10%, 3 PH, 60 Hz
Required at Factory Voltage Setting 
Power Requirement 
Cutting FluidTank Capacity12 gal 45 liters 
Hydraulic
Tank Capacity 4.5 gal17 liters 
Pressure Setting  
Chip DisposalManual
Angle
Saw Frame Angle– 60° ~ 90°~ +45° 
Angle SwivelManual
Angle DisplayAngle Scale
Machine Dimensions (W x L x H)Head-Up Position79.9″ x 64.2″ x 2029 x 1631 x
Head Down Position79.9″ x 64.2″ x 57.2″2029 x 1631 x 1453 mm
Table Height30.3″770 mm
Machine Weight1,543 lbs700 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

Most Popular options

  • Automatic Mist Lube
  • Variable Vise Pressure
  • Free Standing Roller Table

Additional Information

Specifications

Capacity: 90°
12” H x 18” W Rectangle, 13” Round.
Capacity: 45°
11” H x 12” W Rectangle, 13” Round.
Capacity: 60°
11” H x 8” W, 9.5” Round.
Blade
13’ 6” L x 1” W x .035” T.
Blade Tension
Manual tension (30,000 psi) provides consistent square cutting accuracy.
Speed Range
Blade speed is variable through a precision balanced step pulley and heavy-duty worm gear transmission. Blade speeds are 85, 150, 230 and 330 SFPM. The broad speed range allows for optimum cutting of a large variety of materials.
Hydraulic Down Feed
Infinitely variable feed rate is hydraulically controlled for fast, accurate cutting. Settings are made at the operator’s control station.
Hydraulic Frame Return
The saw frame is raised hydraulically using a push button mounted on the operator’s control panel.
Motors
Blade Drive: 3 H.P., Hydraulic Pump: 1/2 H.P., Coolant Pump Motor: 1/8 H.P. - Machines are available with either 230 or 460 volt, 3 ph., 60 Hz. Electrics. Voltage must be specified on original order.
Blade Guides
Carbide Blade Guides provides reduced vibration, heat, and blade stress providing longer blade life and accuracies of + .002 per inch of cut material.
Chip Brush
Powered from the drive wheel of the saw, the brush changes speed with the blade to assure that chips are being removed from each gullet, improving cutting performance and blade life.
Vise Jaw
Hydraulic vise design clamps and holds the work piece securely. The vise is operated by a selector switch located on the operator’s control panel. Maximum vise opening is 18”.
Swivel
The saw frame swivels a full 60° to the rear and 45° to the front for optimum miter cutting capability. The pivot shaft has sealed bearings for maintenance free operation, while a pointer and angle scale (-60° TO + 45°) make setup fast and easy. Stops are provided at -60° and +45°.
Operators Control Panel
Operation of the machine is safe and convenient from the swing arm pedestal mounted on the machine base.

Material Handling

Free Standing Roller Table
5’ long. Table is constructed from 3” x 4.1 lb./ft.  Channel with five 2.5” diameter ball bearing rollers on 12” Centers and two track stands.
Variable Vise Pressure
Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material.

Material Handling

Free Standing Roller Table
Table is constructed from 3” x 4.1 lb./ft. Channel with five 2.5” (63mm) diameter ball bearing rollers on 12” Centers and two track stands. Track sections can be used on either the loading or discharge side of the machine and are free standing.
Variable Vise Pressure
Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion.

Tab Title 4

Table Title 5

Request a Sample

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.