No products in the cart.
When cutting a large plate with a smaller diameter cutter, it requires multi-pass cutting, and when the cutting-pass is increased, the machining time becomes even longer. Also, the multi-pass cutting can leave ridges between the cutting tracks, which requires highly skilled programmers to run the machine.
This machine is equipped with a large ” ( mm) diameter cutter, which enables the one-pass cutting of up to ” ( mm) in width, eliminating the ridges that are made with cutting with the smaller diameter cutter.
| Model | PMH3015 | ||
|---|---|---|---|
| Body | Index Table Size | 126″ x 59″ | 3200 x 1500 mm |
| Max Longitudinal Travel (X-Axis) | 130″ | 3300 mm | |
| Max Cross Travel (Y-Axis) | 59″ | 1500 mm | |
| Max Vertical Travel (Z-Axis) | 15.7″ | 400 mm | |
| Distance from Insert Edge to Table Surface | 5.9″ – 21.65″ Cutter Thickness: 3.94″ |
150 – 550 mm Cutter Thickness: 100 mm |
|
| Inside Distance Between Two Columns | 70.8″ | 1800 mm | |
| Capacity | Max Material Dimensions (W x L x H) | 118.1″ x 59″ x 13.8″ | 3000 x 1500 x 350 mm |
| Face Mill Cutter Diameter | Dia. 20.6″ | Dia. 525 mm | |
| Table Loading Capacity (Workpiece + Magnetic Chuck) | 28660 lb | 13000 kg | |
| Feed Speed |
Rapid Feed Speed (X & Y-Axis) | 82.0 ft/min | 25 m/min |
| Rapid Feed Speed (Z-Axis) | 49.2 ft/min | 15 m/min | |
| Cutting Feed Speed | 0.039 – 78.74 in/min | 1 – 2000 mm/min | |
| Spindle | Spindle Diameter | Equivalent to JIS No.60 | |
| Spindle Nose | dia. 1.875″ pilot boss | dia. 47.625 mm pilot boss | |
| Spindle Speed | 60 – 400 rpm | ||
| Spindle Speed (Optional High-Speed Spec.) | 60 – 500 rpm | ||
| Max Spindle Torque | 2163 Nm | ||
|
Motors |
Spindle Motor (AC Spindle, 50% ED/cont.) | 41/30 HP | 30/22 kW |
| Feed Motor (X-Axis) (AC Servo Motor) | 8 HP | 6kW | |
| Feed Motor (Y & Z-Axis) (AC Servo Motor) | 9.5 HP | 7kW | |
| Spindle Lubricant Pump | 0.1 HP | 0.08 kW | |
| Spindle Surface Lubricant pump | 0.02 HP | 0.017 kW | |
| Machine Dimensions (W x L x H) (without safety fence) | 407.5″ x 205.9″ x 129.9″ | 8150 x 4610 x 3150 mm | |
| Machine Weight | 48501 lb | 22000 kg | |
| Spindle Lubrication Oil Tank | 3.17 gal. | 12 liter | |
| Spindle Surface Lubricant Oil Tank | 0.79 gal. | 3 liter | |
| Cutter Heeling | 0.0012″/11.8″ | 0.03/300 mm | |
| Air Pressure Requirement | 71.25psi and over, 105.67 gal./min and over |
0.5Mpa and over, 400L/min and over |
|
| Electric Power Requirement | 57 kVA, AC200/220V ±10%, 50/60Hz | ||
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.
Contact for repairand recovery of AMADA products and our corporate activities.
©2021 Amada Machinery America Inc. All Rights Reserved. Website Design and Development by Stellar Blue Technologies.
