| Model | THV1600 | ||
|---|---|---|---|
| Body | Index Table Size | 43.3″ x 43.3″ | 1100 x 1100 mm |
| Max Longitudinal Travel (X-axis) | 78.7″ | 2000 mm | |
| Max Cross Travel (Y&X-axis) | 25.4″ | 645 mm | |
| Distance from Spindle Nose to Table Center | 9.76″ – 35.15″ | 248 – 893 mm | |
| Distance Between Both Spindle Nose | 19.53″ – 70.31″ | 496 – 1786 mm | |
| Distance from Table Surface to Spindle Center | 23.81″ | 605 mm | |
| Index Table Driving Angle | 0/45/90/135 Degree | 0/45/90/135 Degree | |
| Capacity | Max Machining Dimensions (W x L x H) | 62.99″ x 62.99″ x 11.81″ | 1599.946 x 1599.946 x 299.974 mm |
| Min Machining Dimensions (W x L x H) | 15.74″ x 15.74″ | 399.796 x 399.796 mm | |
| Chamfering Size | Max C50: Square 21.6″ – 42.2″ | Max C50: Square 550-1150 mm | |
| Face Mill Cutter Diameter | Dia. 12.4″ | Dia. 315 mm | |
| Table Loading Capacity (Max Workpiece Weight) | 8818 lb | 4000 kg | |
| Feed Speed | Rapid Feed Speed (X-Axis) | 65.6 ft/min | 20 m/min |
| Rapid Feed Speed (Y & Z-Axis) | 39.3 ft/min | 12 m/min | |
| Cutting Feed Speed (Manual) | 0.039 – 59.05 in/min | 1 – 1500 mm/min | |
| Cutting Feed Speed (Auto) | 0.039 – 196.85 in/min | 1 – 5000 mm/min | |
| Handle Feed (Manual Pulse Generator) | 0.000039/0.00039/0.0039 in/1pulse | 0.001/0.01/0.1 mm/1pulse | |
| Spindle | Spindle Diameter | Equivalent to JIS No.50 | |
| Shape of Spindle Nose | Dia. 1.875″ pilot boss Resizable to dia. 2.362″ by collar | dia. 47.625 mm pilot boss Resizable to dia. 60mm by collar | |
| Spindle Speed | 30 – 1000 RPM | ||
| Max Spindle Torque | 835 Nm | ||
Motors | Spindle Motor (AC Servo Motor) | 20/15 HP | 15/11 kW |
| Feed Motor (X-Axis) (AC Servo Motor) | 10 HP | 7 kW | |
| Feed Motor (Y & Z-Axis) (AC Servo Motor) | 5.5 HP | 4 kW | |
| Hydraulic Unit | 7.5 HP | 5.5 kW | |
| Chip Conveyor | 1/2 HP | 0.4 kW | |
| Lubrication Oil Pump | 1/40 HP | 0.018 kW | |
| Machine Dimensions (W x L x H) | 273.2″ x 263.8″ x 113.9″ | 6940 x 6700 x 2892 mm | |
| Machine Weight | 57320 lb | 26000 kg | |
| Hydraulic Oil Tank | 26.4 gal | 100 litter | |
| Lubrication Oil Tank | 0.47 gal | 1.8 litter | |
| Cutter Heeling | 0.0012″/11.8″ | 0.03/300 mm | |
| Air Pressure Requirement | 71.25psi and over, 105.66 gal./min and over | 0.5Mpa and over, 400L/min and over | |
| Electric Power Requirement | 62 kVA, AC200/220V ±10%, 50/60Hz | ||
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.
Contact for repair and recovery of AMADA products and our corporate activities.
