Quote Request

No products in the cart.

MSIW192DX

Description

IRONWORKER

Strongest LED Lighting &
Best Stripper in the Industry

  • Heavy-Duty
  • Dual Cylinder
  • Completely Integrated
  • 192 Ton Capacity
  • 15 H.P.
  • 24-9/16” Throat
  • 5 Work Stations
  • Simultaneous Dual Operation

resources

Download Brochure & Specification Sheet

features

  • Five (5) Sets of Punches & Dies
    • Punches: 9/16″, 11/16″, 13/16″, 15/16″, 1-1/16″
    • Dies: 19/32″, 23/32″, 27/32″, 31/32″, 1-3/32″
  • Magnetic Base Work Light
  • Adjustable Electric Back Gauge (36″)
  • Scrap Boxes at Punching & Notching Stations
  • Adjustable Stroke Depth at Punch
  • Two (2) Full-Control Foot Pedals
  • Two (2) Hold Die Holders
  • Two (2) Piece Gauging Table at Punch Station
  • Keyed Punch Holder for Shaped Tooling

specifications

ModelMSIW192DX
Work Stations5
PunchingPunching Pressure192 Tons
Standard Tooling1-1/2″ x 1-1/2″
Large Tooling2″ x 1-3/16″
*Oversize Tooling4-5/15″ x 1/2″
Throat Depth24″
Stroke Length3-1/8″
Cycle/Min. (3/4″)22
Work Height44-1/2″
Flat Bar ShearingCapacity16″ x 1″
Width & Thickness24″ x 3/4″
Blade Length24″
Angle Flange Trim5″ x 5/8″
Work Height37″
 Angle Shear90°8″ x 8″ x 3/4″
45°3″ x 3″ x 3/8″
Work Height44-1/2″
Bar ShearingRound Bar2-1/4″
Square Bar2″ x 2″
**Channel Shear10″
**H Beams10″
**T Beams6″ x 9/16″
Work Height44-1/2″
NotchingRectangular Notcher2-3/8″ x 4″ x 5/8″
**Large V4″ x 4″ x 5/8″
Work Height36-1/2″
Special ToolingSingle V Bending Attachment10″ with 3″ wide V
Multi V Bending Attachment27-1/2″ with 1/2″, 3/4″, 1″, 1-1/4″ wide V

*Contact your Regional Sales Manager for more information.
**With special tooling only. (Measurements converted from metric units and may not be exact.)

Specifications and machine design may change without notice at the sole discretion of Amada’s Engineering Department.

options

  • V-Notcher at Notch Station
  • Single V Bending Attachment
  • Multi V Bending Attachment
  • Electric Back Gauge 6′
  • Channel Web Die Holder
  • Oversize Punching Kit
  • Channel Shear 3″ x 4.1″ lb/ft
  • Channel Shear 4″ x 5.4″ lb/ft

Additional Information

 

Specifications

Punching
Punch Pressure
192 tons
Punch Work Table
Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper
For fast and easy setup.
Die Holder
Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling
1-1/2" in 1-1/2" material.
CPD Series
26 punch, 62 die
Large Tooling
2" in 1-3/16"
CPD Series
SP51P punch, SP80D die
Optional Oversize Tooling
4-5/16" in 1/2" material.
Throat Depth
24-9/16"
Stroke length
3-1/8"
Cycles per Minute in 3/4"
22
Punching Station Work Height
44-1/2"
Flat Bar Shearing
Flat Bar Shear Capacity
16" in 1"
Maximum Width x Thickness
24" in 3/4"
Support Table
Includes guides for accurate positioning and indicator lines at 30 and 45 Degrees left and right.
Adjustable Hold-Down
Holds work piece securely in position when shearing.
Upper Shear Blade
Provides for minimum distortion. Two usable edges.
Blade Length
24"
Angle Flange Trim
5" in 5/8"
Flat Bar Shear Work Height
37"
Angle Shearing
Max. Capacity - 90 Degrees
8" x 8" x 3/4"
Max. Capacity - 45 Degrees
3" x 3" x 3/8"
Shear Blades
Four usable edges.
Angle Shear Work Height
44-1/2"
Bar Shearing
Round Bar Capacity
2-1/4"
Square Bar Capacity
2" x 2"
Six Cavity Round Bar Shear Sizes
3/4, 1", 1-1/8", 1-1/2", 2"
Six Cavity Square Bar Shear
1", 1-1/2" to 2-1/8"
Channel Shear Max.
10"
I-Beam Shear Max.
10"
Bar Shear Work Height
44-1/2"
Notching
Rectangular Notcher
2-3/8" x 4" x 5/8"
Gauge Table with Stops
For precise positioning.
Notcher Work Height
36-1/2"
Other Standard Equipment
Five Sets of Punches and Dies
Punches: 9/16", 11/16", 13/16", 15/16", 1-1/16"; Dies: 19/32", 23/32", 27/32", 31/32", 1-3/32"
CPD Series
26 punch, 62 die
Two Piece Gauging Table at Punch Station
Table comes with 39" X axis gauge.
Machine Net Weight
13,200 lbs.
Machine Dimensions
93" L x 38" W x 90 H
Magnetic Base Work Light
Adjustable Electrical Back Gauge (39")
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Two Full-Control Foot Pedals
Two Hole Die Holder
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230/460 Volt, 3 phase, 60 Hz

Options

Electric Back Gauge
6 ft. (in place of standard 3 ft.)
Channel Shear
3” x 4.1 lb. per foot
4” x 5.4 lb. per foot
5” x 6.7 lb. per foot
6” x 8.2 lb. per foot
V-Notcher at Notcher Station (4” x 4” in 5/8”)
208 or 575 Volt requires Buck Boost
Flat Bar Shear Hydraulic Hold-Down (Special Order w/ machine only)
Bending Attach Single V (3” wide V; 10” wide material)
Bending Multi V (3/8”,7/16”,5/8”,15/16” wide V’s x 27-1/2” long)
Hydraulic Punch Stripper (Special Order)
Channel Die Holder Used with 3” channel and larger
Optional Table for oversize punching 2-1/4” to 4-5/16”
Oversize Punching Kit 2-1/4” to 4-5/16” Diameter Holes

Tab Title 3

Tab Title 4

Table Title 5

Request a Sample

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.