Model | VT7995M | |||
---|---|---|---|---|
Cutting Capacity |
Round (Diameter) |
at 0° | 31.25″ | 794 mm |
at 45° Right | 25.5″ | 648 mm | ||
at 45° Left | 24″ | 610 mm | ||
at 60° Right | 17.5″ | 444 mm | ||
at 60° Left | 15.75″ | 400 mm | ||
Rectangle (W x H) |
at 0° | 31.25″ x 37.5″ | 794 x 952 mm | |
at 45° Right | 31.25″ x 25.5″ | 794 x 648 mm | ||
at 45° Left | 31.25″ x 24″ | 794 x 610 mm | ||
at 60° Right | 31.25″ x 17.5″ | 794 x 444 mm | ||
at 60° Left | 31.25″ x 15.75″ | 794 x 400 mm | ||
Maximum Vise Opening |
31.25″ | 794 mm | ||
Work Load Capacity | 5,000 lbs | 2,268 kg | ||
Saw Blade |
Dimensions (L x T x W) | 25′ x 0.063″ x 2″ | 7620 x 1.6 x 54 mm | |
Blade Speed | 60-400 ft./min by Inverter | 18-122 m/min by Inverter | ||
Tension Control | Hydraulic | |||
Blade Control |
Cutting Control | Direct Force Sensing Electric Ball Screw with PC3 Programmable Control |
||
Blade Feed Force | 0 to 350 lbs | 0 to 1556 N | ||
Vise Operation |
Type | Main Vise (Optional second vise is available to install) |
||
Control | Hydraulic, Full Stroking with 9-12″ High x 15″ Wide 60° Faceplates |
|||
Motors |
Saw Blade | 15 HP | 11.2 kW | |
Hydraulic Pump | 5 HP | 3.7 kW | ||
Cutting Fluid Pump | 1/2 HP | 0.4 kW | ||
Tilt Gear | 1/15 HP | 0.05 kW | ||
Power Requirement |
Power Supply Voltage | AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering |
||
Power Requirement | ||||
Cutting Fluid |
Tank Capacity | 75.0 gal | 284 liters | |
Pump Type | Electric | |||
Hydraulic |
Tank Capacity | 10 gal | 38 liters | |
Chip Disposal |
Manual |
|||
Machine Dimensions (W x L x H) | 153.6″ x 191.8″ x 144.7″ | 3901 x 4871 x 3674 mm | ||
Table Height (Above Floor) | 52.0″ |
1321 mm |
||
Machine Weight | lbs | kg |
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.
Contact for repairand recovery of AMADA products and our corporate activities.
©2021 Amada Machinery America Inc. All Rights Reserved. Website Design and Development by Stellar Blue Technologies.