VT3850A (380APC)

15" x 20", 15" Round

15" x 14", 14" Round

15" x 9.25", 9.25" Round

15" x 13.25", 13.25" Round

15" x 8", 8" Round

14.5" x 20", 14.5" Round

14.5" x 13.5", 13.5" Round

14.5" x 8.75", 8.75" Round

14.5" x 12.75", 12.75" Round

14.5" x 7.75", 7.75" Round

5 H.P. electric with sensor less vector control for smooth acceleration and full torque.

Infinitely variable: 60 to 400 fpm. Blade speed can be automatically set when material is selected.

For miter cutting up to 60° left and right of vertical. Electrically powered, chain driven, with encoder feedback and Amada Marvel PC3 controller.

Adjustable 0° or 3° forward approach angle, for notching, or increased efficiency in cutting of structural materials. Must specify if 0° or straight column set up is desired as the machines are by default shipped from the factory in 3° Canted Column

Direct Force Sensing Electric Ball Screw Feed which combines more consistent feed force with greater control, 0 - 300 lbs, column travels on re-circulating linear ball ways. Feed pressure can be automatically set when material is selected.

Automatically senses resistance as the column returns and stops to prevent blade damage.

16' Long x 1.25" Wide, .042". One Welded-Edge Band is furnished with each machine as part of standard Start-up supplies.

Patent pending Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self tensioning design.

Hydraulically controlled, 35,000 psi. max. Machine equipped with automatic blade break / blade stall shut off switch.

Hydraulically positioned and locking, travels on linear guides, controlled through PC3 touch screen control.

Hydraulic, half stroking with 6.7" High x 11.4" Wide 60° faceplates. Optional variable vise pressure available.

Built-in Flood system, available with Drop Lubrication system, including chip pan with chip removal ramp.

One ball bearing roller on the entry side of the machine bed.

Washes away chips from hard-to-get-at places reducing clean-up time.

The Automatic Bar Feed design features a 48" stroke length with indexing speeds of up to 70 ft./min., and creep speeds of 33 in./min. The bar feed vise is electrically driven and combines precision double ball screws with preloaded re-circulating ball linear guides, resulting in positioning accuracy of ± .005" per index. The vise itself is hydraulically clamped to prevent material slippage. Material can also be fed through the machine manually in both directions using the shuttle vise. Optional outboard and second machine vises are available.

Provides a Programmable Logic Control Unit with an 9" color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library. Both blade speed and feed force are automatically set according to material type for optimal cutting performance. Job features include Inch/Metric capability, out-of-stock shut down device, a fast cut job option and expanded memory storage using removable media. Also includes Jammed Blade Protection that senses resistance as the column returns and stops to prevent blade damage.

Opposite Hand or Right-to-Left work entry available.

Main Drive: 5 H.P., Coolant Pump: 1/8 H.P., Hydraulic Pump: 2 H.P.

IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage control to all push buttons at operator's control panel and machine lighting circuits. PLC control and drives mounted in moisture-tight compartment with vibration isolation mountings. Electrical Equipment conforms to National Electrical Code NFPA 79. The Electrical Control Panel is U.L. Labeled.