Close this search box.

Quote Request

No products in the cart.

VT5063MW (2150M)



The Worlds Most Popular Vertical Tilt-Frame

  • 1-1/2″ Blade VT5063MW (2150M)
  • Semi-Automatic
  • Heavy-Duty
  • Hydraulic
  • Metal Cutting
  • High-Speed Bandsaw


Download Brochure & Specification Sheet


  • Tilting Column
    •  For miter cutting up to 60° left and right of vertical. Now with Electronic Tilt, the column is electrically powered with encoder feedback and PC3 touch screen controller for precision miter positioning.
  • 0° – 3° Canted Column
    • Standard 3° forward approach angle, for increased efficiency in the cutting of structural materials. NOTE: If the non-canted 0° option is required with a 1.25” blade, the VT5063MW (2150M) must be purchased. The VT5063MW (2150M) order must specify that the 1.25” blade is required with the non-canted option.
  • Blade Guide
    • Patent-pending Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self-tensioning design.
  • Upper Blade Guide Arm
    • Hydraulically positioned and locking, controlled by a selector switch at the operator’s station.
  • Flushing Hose
    • Washes chips from hard to get at places reducing clean-up time.
  • Work-Rest Rollers
    • Two turned ball-bearing rollers, one on the entry side and one on the discharge side of the machine bed.
  • Vises
    • Hydraulic, full stroking with 9-1/2” high x 15” wide 60° faceplates. Removable face plates without tools to allow for both miters and 90° at the blade.
  • Automatic Bar Feed
    • The patented automatic bar feed design features a 48″ stroke length with indexing speeds of up to 60fpm. The bar feed is servo driven with encoder feedback, and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of +/- .005″ per index. Optional long-stroke shuttles.
  • PC3 Programmable Control®
    • Provides a Programmable Logic Control Unit with a 12” color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library.



Cutting Capacity

Round (Diameter)

at 0°20.0″508 mm
at 45°17.0″ 432 mm
at 60°11.25″286 mm
Rectangle (W x H)
at 0° 20.0″ x 25.0″508 x 635 mm
at 45°20.0″ x 17.0″508 x 432 mm
at 60°20.0″ x 11.25″508 x 286 mm
Maximum Vise Opening
20.25″514 mm
Work Load Capacity8,000 lbs3,628 kg
Saw Blade
Dimensions (L x T x W)18′ 2″ x 0.050″ x 1-1/2″5537 x 1.3 x 41 mm
Blade Speed30-500 ft./min by Inverter9-152 m/min by Inverter
Tension ControlHydraulic
Blade Control
Cutting ControlDirect Force Sensing Electric Ball Screw
with PC3 Programmable Control
Blade Feed Force0 to 300 lbs0 to 1334 N
Vise Operation
TypeMain Vise (Optional second vise is available to install)
ControlHydraulic, Full Stroking with 9-12″ High x 15″ Wide 60° Faceplates
Saw Blade7.5 HP 5.6 kW
Hydraulic Pump 5 HP3.7 kW
Cutting Fluid Pump1/8 HP0.1 kW
Tilt Gear 1/15 HP0.05 kW
Power Requirement
Power Supply VoltageAC230V±10% or AC460V±10%, 3 PH, 60 Hz
Voltage must be specified when ordering
Power Requirement 
Cutting Fluid
Tank Capacity60 gal227 liters
Pump TypeElectric
Tank Capacity10 gal38 liters
Chip Disposal
Machine Dimensions (W x L x H)94.7″ x 99.2″ x 90.8″2404 x 2518 x 2305 mm
Table Height (Above Floor) 40.0″1016 mm
Machine Weight2,867 lbs1,300 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.


Contact for repairand recovery of AMADA products and our corporate activities.