S-36V

Description

HIGH-SPEED VERTICAL CONTOUR SAW

The Vision of Precision

3 H.P.
1” Blade
Tilt Blade
Circle Cutting Attachment
Electrical Door Interlocks

Request a Quote

resources

Download Brochure & Specification Sheet

features

Blade Tension
- The tension indicator assures fast, easy and accurate settings. The upper wheel has up to 3” (76 mm) of take-up.
Blade Wheels
- Balanced cast iron blade wheels are pre-loaded with ball bearing hubs to assure long life even when running at high speed.
Upper Guide Arm
- Adjustable for varying material sizes. The guide arm is moved via a handwheel and rack and pinion device. Once the correct height is set, the arm can then be locked in place. The maximum height is 12” (305 mm).
Table
- The table tilts 45 degrees right and 10 degrees left. Table size is 23.5” x 27.5” (597-699 mm) and 17.5” x 27.5” (445-699 mm). Work height is 40” (1016 mm).
Blade Welder
- The blade welder has a capacity of .125”-.75” (3-19 mm). With the annealer, grinder, and blade shear, complete blades can be easily made to whatever length is required. A blade can also be broken and re-welded for hole cutting.

specifications

Model		S-36V
Cutting Capacity		36″ x 20″	914 x 508 mm
Throat Depth		36″	914 mm
Table Size (W x L)		23-1/2 x 27-1/2″, 17-1/2″ x 27-1/2″	597 x 698 mm, 445 x 698 mm
Table Tilt		Right 45° Left 10°
Saw Blade	Blade Width	1/8″ – 1″	3.175 to 25.4 mm
	Blade Length	198-1/4″	5035 mm
	Blade Welder Capacity	1/4″ – 3/4″	6.35 to 19.1 mm
	Blade Speed	50-415 and 550-5000 ft/min	15-126 and 167-1524 m/min
	Tension Control	Manual
Motors	Saw Blade Motor	3 HP	2.2 kW
Power Requirement	Power Supply Voltage	AC230V±10%, 3 PH, 60 Hz, Voltage must be specified when ordering
Power Requirement	Power Requirement	kVA
Machine Dimensions (W x L x H)		69″ x 32″ x 81″	1753 x 813 x 2057 mm
Table Height		40″	1016 mm
Machine Weight		1,760 lbs	798 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

Other Standard Features

Rip Fence
Work Light
Miter Gauge
Chip Blower
Magnifying Glass
Manual Feed Screw
Electric Tachometer
Circle Cutting Attachment
Electrical Door Interlocks
Wheel Cast-Iron Rubber Crown

Additional Information

Resources

Spartan Contour Saw Brochure

Specifications

Capacity

Blade to Column: 36"; Work Height: 12"

Blade

.125" - 1"; Blade Length 197 3/4" (The start up blade provided is ½” width, 12/14 TPI)

Machine Base

The base is constructed from heavy gauge steel providing a rigid, heavy-duty foundation, reducing vibration during cutting even at high speeds.

Blade Guides

The blade guides are universal V-type carbide with an adjustable carbide backup. The V guides and the backup button are adjustable for the full range of blades from .125” to 1”.

Blade Tension

The manual blade tension device assures that no matter what width blade is being used the proper tension is achieved. The tension indicator assures fast, easy and accurate settings. The upper wheel has up to 3” of take-up.

Blade Speed

Blade speeds are infinitely adjustable through a two-speed worm and worm gear transmission. Speeds of 50-415 and 550-5000 SFPM allow for cutting almost any type of material.

Blade Wheels

Three (3) balanced cast iron blade wheels are pre-loaded with ball bearing hubs to assure long life even when running at high speed. The rubber crowned tire mounted to each wheel preserves the blade’s tooth set.

Upper Guide Arm

The upper guide arm is adjustable for varying material sizes. The guide arm is moved via handwheel and rack and pinion device. Once the correct height is set, the arm can then be locked in place. Maximum height is 12”

Table

The saw is constructed of cast iron to reduce vibration while cutting and has one slot to the right of the blade to accommodate accessories and other fixturing. The table tilts 45 degrees right and 10 degrees left. Table size is 23.5” x 27.5" and 17.5" x 27.5" .Work height is 40”.

Blade Welder

The blade welder has a capacity of .125” – .75". With the annealer, grinder and blade shear, complete blades can be easily made to whatever length is required. A blade can also be broken and re-welded for hole cutting.

Options

Rip Fence

Miter Gauge

Circle Cutting Attachment

Magnifying Glass

Manual Feed Screw

Tab Title 3

Tab Title 4

Table Title 5

Request a Sample

STAY CONNECTED WITH AMADA

Contact for repair and recovery of AMADA products and our corporate activities.