Quote Request

No products in the cart.

SA460WPC

Description

HORIZONTAL MITERING SAW

The Vision of Precision

  • 5 H.P.
  • 1.5” Blade
  • Heavy-Duty
  • Hydraulic
  • Metal Cutting

resources

Download Brochure & Specification Sheet

features

  •  Hydraulic Down Feed
    • Feed rate and down pressure can be controlled for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
  •  Hydraulic Shuttle Feed
    • Length settings of 0-27.56” (0-700mm) are accomplished with simple programming at the operator’s touch screen.  The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is + .005” per index. 
  • PC Programmable Control
    • Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to ten jobs. Inputs include Part Length from 0-999.999” and the Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made. 
  • Out-of-Stock Switch
    • The machine will shut off automatically when the material is no longer present in the rear vise jaws, allowing for truly automatic operation.
  • Full Stroking Hydraulic Vise Jaws
    • Hydraulic vices hold the work piece, providing accurate cuts and longer blade life. 
  • Shuttle Vise
    • The shuttle vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts. The remnant length is 9.5” (241 mm).
 

specifications

ModelSA460WPC
Cutting Capacity Round (Diameter) at 90°18″ 460 mm
Round (Diameter) at 45°15″380 mm
Rectangle (W x H) at 90°24″ x 15″ 23″ Max x 18″610 x 380mm 580 Max x 460 mm
Square at 90°18″ x 18″460 x 460 mm
Rectangle (W x H) at 45°15″ x 15″380 x 380 mm
Work Load Capacity  
Blade SawBlade Size (L x T x W)17’6″ x 0.050″ x 1-1/2″ 5330 x 1.3 x 41 mm 
Blade Speed65-330 ft/min by Inverter20-100 m/min by Inverter
Tension ControlHydraulic 
Blade ControlTop Limit Setting Manual Setting
Cutting ControlHydraulic Flow Control Valve 
Vise Operation
Type  Main and Rear Vise
Control Hydraulic Full-Stroke Cylinder

Motors

Saw Blade5 HP3.7 kW
Hydraulic Pump1/2 HP0.37 kW
Cutting Fluid Pump1/8 HP0.06 kW
Power RequirementPower Supply VoltageAC230V±10% or AC460V±10%, 3 PH, 60 Hz,
Required at Factory Voltage Setting 
Power Requirement 
Cutting FluidTank Capacity14.5 gal55 liters
Hydraulic
Tank Capacity4.0 gal15 liters 
Pressure Setting  
Chip DisposalChip Conveyor 
Material Index
Index MechanismShuttle Vise 
Stroke15.7″ 400 mm 
Length  
Number of Input Block/Station 
Number of Cut-Off Pieces 
Remnant Length  
Machine Dimensions (W x L x H)Head-Up Position110.5″ x 94.3″ x 2807 x 2395 x 
Head Down Position110.5″ x 94.3″ x 65.5″ 2807 x 2395 x 1665 mm 
Table Height27.6″700 mm
Machine Weight4,740 lbs2,150 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

Most Popular options

  • Auto Mist Lube
  • Hydraulic Hold Downs
  • Automatic Chip Removal
  • Extension Dead Roller Table
  • Variable Vise Pressure Controls
  • First Section Dead Roller Table

Additional Information

Specifications

Capacity: 90°
Rectangle 15” x 24”, Round 18”
Capacity: 45°
Rectangle 15” x 15”, Round 15”
Mitering
Manually positioned to 45° right, equipped with degree scale.
Pass Line Height
36.5”
Blade
1-1/2” x .050” x 17-6”
Blade Tension
35,000 PSI. Hydraulically controlled tension provides consistent square cutting accuracy. The motion detector will shut the machine off should the blade break or stall.
Speed Range
65 – 330 SFPM (20 – 101 m/min) infinitely variable through an inverter drive and a heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An electric tachometer assures accurate speed setting.
Hydraulic Down Feed
Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
Hydraulic Shuttle Feed
Length settings of 0 - 27.6” are accomplished with simple programming at the operator’s touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is ± .005 per index.
PC Programmable Control
Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to ten jobs. Inputs include Part Length from 0 to 393.661” and Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen, but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made. The control provides the option of running up to 10 jobs consecutively.
Motors
Blade Drive: 5 H.P., Hydraulic Pump Motor: 1 H.P., Coolant Pump Motor: 1/6 H.P. - All motors are dual voltage, choose either 230 or 460 volt, 3 ph. 60 Hz.
Out-of-Stock Switch
The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
Blade Guides
The combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of ± .002 per inch of cut material.
Fast Approach
Work height is manually set allowing the head to rise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
Chip Brush
Powered from the main drive wheel of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.
Full Stroking Hydraulic Vise Jaws
Holding the work piece on both sides of the blade reduces blade vibration, providing more accurate cuts and longer blade life.
Rear Vise
The rear vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts.
Operator's Control Panel
Conveniently mounted on the Right hand side of the machine and offers full control of all machine functions such as; Vises, Blade Speed, Saw Frame, Bundle Clamping, Shuttle Advance & Retract, Coolant and Work Light.
Work Light
Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator’s control panel.
Machine Weight
5700 lbs.net / 6000 lbs. gross (on a skid)

Options

Automatic Chip Removal
The chip auger rotating in the coolant return removes chips quickly and efficiently, freeing the operator to perform more productive operations. 
Hydraulic Hold-downs
The nesting fixtures for vertical clamping are designed for high-production multiple cutting.  Vertically mounted hydraulic clamps located on each vise jaw apply downward pressure to hold multiple bar work or structural shapes.
Variable Vise Pressure
Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material.
Auto Mist Lube
Mist lubricant in addition to standard flood coolant for lubrication.
Free Standing Roller Table
2 meter free standing roller table includes aligning guides. Total weight capacity per table is 4,400 LBS (675 Lbs/Ft).

Tab Title 3

Tab Title 4

Table Title 5

Request a Sample

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.