| Model | H1300II | ||
|---|---|---|---|
| Cutting Capacity | Round (Diameter) | 22.4″ – 52″ | 570 – 1300 mm |
| Rectangle (W x H) | 23.6″ x 23.6″ – 52″ x 52″ | 600 x 600mm – 1300 x 1300 mm | |
| Work Load Capacity | 37,478 lbs | 17,000 kg | |
| Saw Blade | Blade Size (L x T x W) | 40’4″ x 0.063″ x 3″ | 12300 x 1.6 x 80 mm |
| Blade Speed | 50-230 ft/min by Inverter | 15-70 m/min by Inverter | |
| Tension Control | Hydraulic | ||
| Blade Control | Top Limit Setting | Automatic Setting with Quick Approach Feeler | |
| Cutting Control | CNC-Lite, , Hydraulic Flow Control Valve with Stepping Motor | ||
| Vise Operation | Type | Main Vise | |
| Control | Hydraulic Full-Stroke Cylinder | ||
Motors | Saw Blade | 20 HP | 15 kW |
| Hydraulic Pump | 5 HP | 3.7 kW | |
| Cutting Fluid Pump | 1/2 HP | 0.4 kW | |
| Power Requirement | Power Supply Voltage | AC220V±10%, 3 PH, 60 Hz All Other Voltages Require Transformer | |
| Power Requirement | 28 kVA | ||
| Cutting Fluid | Tank Capacity | 73.9 gal | 280 liters |
| Pump Type | Electric | ||
| Hydraulic | Tank Capacity | 52.8 gal | 200 liters |
| Pressure Setting | 1080 psi | 7.6 MPa (76 kgf/cm2) | |
| Chip Disposal | Chip Conveyor | ||
| Material Index | Index Mechanism | Table Feed, Manual operation | |
| Stroke | 70.8″, by Hydraulic | 1800 mm, by Hydraulic | |
| Length | NA | ||
| Number of Input Station | NA | ||
| Number of Cut-Off Pieces | NA | ||
| Remnant Length | NA | ||
| Machine Dimensions (W x L x H) | Head-Up Position | 220.4″ x 171.6″ x 160.8″ | 5597 x 4360 x 4084 mm |
| Head Down Position | 220.4″ x 171.6″ x 136.9″ | 5597 x 4360 x 3479 mm | |
| Table Height | 27.5″ | 700 mm | |
| Machine Weight | 40,790 lbs | 18,500 kg | |
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.
Contact for repair and recovery of AMADA products and our corporate activities.
