| Model | H1000II | ||
|---|---|---|---|
| Cutting Capacity | Round (Diameter) | 15.7″ – 40″ | 400 – 1000 mm |
| Rectangle (W x H) | 15.7″ x 15.7″ – 44″ x 40″ | 400 x 400 mm – 1100 x 1000 mm |
|
| Work Load Capacity | 33,069 lbs. | 15,000 kg | |
| Saw Blade |
Blade Size (L x T x W) | 36’5″ x 0.063″ x 3″ | 11100 x 1.6 x 80 mm |
| Blade Speed | 50-246 ft/min by Inverter | 15-75 m/min by Inverter | |
| Tension Control | Hydraulic | ||
| Blade Control | Top Limit Setting | Automatic Setting with Quick Approach Feeler | |
| Cutting Control | CNC-Light, Hydraulic Flow Control Valve with Stepping Motor | ||
| Vise Operation |
Type | Front and Rear Vises | |
| Control | Hydraulic Full-Stroke Cylinder | ||
|
Motors |
Saw Blade | 15 HP | 11 kW |
| Hydraulic Pump | 5 HP | 3.7 kW | |
| Cutting Fluid Pump | 1/4 HP | 0.2 kW | |
| Wire Brush | 1/8 HP | 0.09 kW | |
| Power Requirement | Power Supply Voltage | AC220V±10%, 3 PH, 60 Hz All Other Voltages Require Transformer |
|
| Power Requirement | 20 kVA | ||
| Cutting Fluid | Tank Capacity | 66.1 gal | 250 liters |
| Pump Type | Electric | ||
| Hydraulic |
Tank Capacity | 39.6 gal | 150 liters |
| Pressure Setting | 1110 psi | 7.8 MPa (78 kgf/cm2) | |
| Chip Disposal | Chip Conveyor | ||
| Material Index |
Index Mechanism | Outboard Vise, Manual Operation | |
| Stroke | 19.7″ | 500 mm | |
| Length | N/A | ||
| Number of Input Station | N/A | ||
| Number of Cut-Off Pieces | N/A | ||
| Remnant Length | N/A | ||
| Machine Dimensions (W x L x H) | Head-Up Position | 213.3″ x 130.7″ x 150.6″ | 5417 x 3321 x 3824 mm |
| Head Down Position | 213.3″ x 130.7″ x 121.1″ | 5417 x 3321 x 3075 mm | |
| Table Height | 33.5″ | 850 mm | |
| Machine Weight | 30,800 lbs | 14,000 kg | |
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.
Contact for repair and recovery of AMADA products and our corporate activities.
