Search
Close this search box.

Quote Request

No products in the cart.

PMH4020

Description

TWO-FACE PLATE MILL

The Vision of Precision

  • Cutting Condition Memory Number 8
  • Spindle Load Meter
  • Electro Permanent Magnetic Chuck with Air Floating System
  • Workpiece Measuring System

resources

Download Brochure & Specification Sheet

features

  • Two-Face Plate Mill
    • Milling Top and Bottom Surface of Custom Plate with PLATE MILL which is a Specially Designed Vertical Milling Machine
  • Difference
    • Conventional Cutting with Small Diameter Cutters
 

When cutting a large plate with a smaller diameter cutter, it requires multi-pass cutting, and when the cutting-pass is increased, the machining time becomes even longer. Also, the multi-pass cutting can leave ridges between the cutting tracks, which requires highly skilled programmers to run the machine.

    • Cutting with PMH4020

This machine is equipped with a large ” ( mm) diameter cutter, which enables the one-pass cutting of up to ” ( mm) in width, eliminating the ridges that are made with cutting with the smaller diameter cutter.

specifications

Model PMH4020
Body Index Table Size 165.3″ x 78.7″ 4200 x 2000 mm
Max Longitudinal Travel (X-Axis) 169.3″ 4300 mm
Max Latitudinal Travel (Y-Axis) 78.7″ 2000 mm
Max Vertical Travel (Z-Axis) 15.7″ 400 mm
Distance from Insert Edge to Table Surface 5.9″ – 21.65″
Cutter Thickness: 3.94″
150 – 550 mm
Cutter Thickness: 100 mm
Inside Distance Between Two Columns 90.5″ 1800 mm
 Capacity Max Material Dimensions (W x L x H) 157.4″ x 78.7″ x 13.8″ 4000 x 2000 x 350 mm
Face Mill Cutter Diameter  Dia. 20.6″  Dia. 525 mm
Table Loading Capacity (Workpiece + Magnetic Chuck) 44092 lb 20000 kg.
Feed Speed
Rapid Feed Speed (X & Y-Axis) 65.6 ft/min 20 m/min
Rapid Feed Speed (Z-Axis) 49.2 ft/min 15 m/min 
Cutting Feed Speed  0.039 – 78.74 in/min  1 – 2000 mm/min
Spindle Spindle Diameter Equivalent to JIS No.60 
Spindle Nose  dia. 1.875″ pilot boss dia. 47.625 mm pilot boss 
Spindle Speed 60 – 400 rpm 
Spindle Speed (Optional High-Speed Spec.) 60 – 500 rpm
Max Spindle Torque 2163 Nm 

Motors

Spindle Motor (AC Spindle, 50% ED/cont.) 41/30 HP 30/22 kW
Feed Motor (X-Axis) (AC Servo Motor) 8 HP 6kW 
Feed Motor (Y & Z-Axis) (AC Servo Motor) 9.5 HP   7kW
Spindle Lubricant Pump 0.1 HP   0.08 kW
Spindle Surface Lubricant pump  0.02 HP  0.017 kW
Machine Dimensions (W x L x H) (without safety fence)  407.5″ x 205.9″ x 129.9″ 8150 x 4610 x 3150 mm
Machine Weight 77161 lb 35000 kg
Spindle Lubrication Oil Tank 3.17 gal. 12 liter
Spindle Surface Lubricant Oil Tank 0.79 gal. 3 liter
Cutter Heeling 0.0012″/11.8″ 0.03/300 mm
Air Pressure Requirement 71.25psi and over,
105.67 gal./min and over
0.5Mpa and over,
400L/min and over
Electric Power Requirement 57 kVA, AC200/220V ±10%, 50/60Hz

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.