HK400

Description

HORIZONTAL MITERING SAW

The Vision of Precision

3 H.P.
1 1/4” Blade
Semi-Automatic
Metal Cutting

Add to Quote

resources

Download Brochure & Specification Sheet

features

Saw Head Frame
- The rigid ‘C’ section frame carries the mountings for the two band wheels, heavy-duty worm drive gear reducer, the band drive motor and saw guide arm mounting supports.
Band Wheels & Drive System
- The inverter-controlled band drive motor is directly coupled to the worm gear reducer eliminating friction losses of a variable speed pulley drive. The drive wheel transmission is designed and manufactured by Amada to provide a high-efficiency speed reduction, which requires no external cooling to deliver more power to the drive wheel. Band speed is set using the band speed adjustment knob on the control panel.
Canted Head and Single Column Mounting
- The head is canted 8° to enable the machine to cut rolled sections e.g. I beams or rectangular tubing at significantly faster rates because the blade is never in full contact with the horizontal section of the material. The single-column mounting enables the saw guides to be much closer together compared to scissor-type machines which improve the cutting performance.

Full Stroke Clamping Vise
- The full stroke clamping vise reduces the operator’s setup time for different widths of material.
Manual Vise Inching Control
- The vise inching control enables the operator to more accurately locate the workpiece for the cut because he can inch the vise until it is just touching the material but not clamped hard. Then with the help of the shadow line projector, make any small adjustment to the position to produce the desired cut.
Guarding
- The saw band is constrained within the heavy gage guarding in all non-cutting areas.

specifications

Model		HK400
Cutting Capacity	Round (Diameter) at 90°	12.6″	320 mm
	Round (Diameter) at 45°	8.9″	200 mm
	Round (Diameter) at 60°	3.9″	100 mm
	Rectangle (W x H) at 90°	16″ x 11″	400 x 280 mm
	Rectangle (W x H) at 45°	8.9″ x 11″	200 x 280 mm
	Rectangle (W x H) at 60°	3.9″ x 11″	100 x 280 mm
Work Load Capacity		880 lbs	400 kg
Saw Blade	Blade Size (L x T x W)	12’9″ x 0.042″ x 1-1/4″	3885 x 1.066 x 32 mm
	Blade Speed	100-325 ft/min by Inverter	30-100 m/min by Inverter
	Tension Control	Manual – Split Clutch
Blade Control	Top Limit Setting	Manual Setting Dial
Blade Control	Cutting Control	Oil Pressure – Flow Control Valve
Vise Operation	Type	Single Vise
Vise Operation	Control	Hydraulic Full-Stroke Cylinder
Motors	Saw Blade	3 HP	2.2 kW
	Hydraulic Pump	1 HP	0.75 kW
	Cutting Fluid Pump	1/16 HP	0.06 kW
Power Requirement	Power Supply Voltage	AC220V±10%, 3 PH, 60 Hz All Other Voltages Require Transformer
Power Requirement	Power Requirement	5.5 kVA
Cutting Fluid	Tank Capacity	10.7 gal	40 liters
Cutting Fluid	Pump Type	Electric
Hydraulic	Tank Capacity	10.7 gal	40 liters
Hydraulic	Pressure Setting	391 psi	2.7 MPa (27 kgf/cm²)
Chip Disposal		Manual
Machine Dimensions (W x L x H)	Head-Up Position	77.6″ x 56.3″ x 73.4″	1970 x 1430 x 1865 mm
Machine Dimensions (W x L x H)	Head Down Position	77.6″ x 56.3″ x 64.0″	1970 x 1430 x 1625 mm
Table Height		30.3″	770 mm
Machine Weight		1,990 lbs	900 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

options

Roller Table 6.5′
Roller Table 10′
Vertical Clamp

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.

Quote Request

HK400

Description

HORIZONTAL MITERING SAW

The Vision of Precision

resources

Download Brochure & Specification Sheet

features

specifications

options

STAY CONNECTED WITH AMADA

Amada Machinery America, INC.

Products

Quick Links