S330/3HV

Download Brochure & Specification Sheet

Hydraulic Down Feed
- Infinitely variable feed rate is hydraulically controlled for fast, accurate cutting. Settings are made at the operator’s control station.
Hydraulic Auto Frame Return
- The saw frame will automatically raise hydraulically at the end of a saw cut. The saw frame can also be lifted hydraulically with the push button switch.
Chip Brush
- Powered from the drive wheel of the saw, the brush changes speed with the blade to assure that chips are being removed from each gullet, improving cutting performance and blade life.
Vise Jaw
- Hydraulic rack and pawl vise design clamps and holds the work piece securely. The vise is operated by a selector switch located on the operator’s control panel.
Swivel Miter
- The saw frame swivels a full 60 degrees to the rear and 45 degrees to the front for optimum miter cutting capability. Stops are provided at -60 and +45 degrees.

Model		S330/3HV
Cutting Capacity	Round (Diameter) at 90°	13″	330 mm
	Round (Diameter) at ± 45°	13″	330 mm
	Round (Diameter) at − 60°	8.7″	220 mm
	Rectangle (W x H) at 90°	18″ x 12″	460 x 300 mm
	Rectangle (W x H) at ± 45°	12″ x 12″	305 x 305 mm
	Rectangle (W x H) at − 60°	11″ x 8″	280 x 203 mm
Work Load Capacity
Saw Blade	Blade Size (L x T x W)	13’6″ x 0.035″ x 1″	3885 x 0.9 x 27 mm
	Blade Speed	60-330 ft/min by Inverter	18-100 m/min by Inverter
	Tension Control	Manual
Blade Control	Top Limit Setting	Manual Setting
Blade Control	Cutting Control	Hydraulic Flow Control Valve
Vise Operation	Type	Single Vise
Vise Operation	Control	Adjustable Hydraulic Vises
Motors	Saw Blade	3 HP	2.2 kW
	Hydraulic Pump	1/2 HP	0.37 kW
	Cutting Fluid Pump	1/8 HP	0.06 kW
Power Requirement	Power Supply Voltage	AC230V±10%, 3 PH, 60 Hz Required at Factory Voltage Setting
Power Requirement	Power Requirement
Cutting Fluid	Tank Capacity	12 gal	45 liters
Hydraulic	Tank Capacity	4.5 gal	17 liters
Hydraulic	Pressure Setting
Chip Disposal		Manual
Angle	Saw Frame Angle	– 60° ~ 90°~ +45°
	Angle Swivel	Manual
	Angle Display	Angle Scale
Machine Dimensions (W x L x H)	Head-Up Position	79.9″ x 64.2″ x	2029 x 1631 x
Machine Dimensions (W x L x H)	Head Down Position	79.9″ x 64.2″ x 57.2″	2029 x 1631 x 1453 mm
Table Height		30.3″	770 mm
Machine Weight		1,543 lbs	700 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

Contact for repairand recovery of AMADA products and our corporate activities.