| Model | PA13MPC | ||
|---|---|---|---|
| Cutting Capacity | Round (Diameter) | 13″ | 330 mm |
| Rectangle (W x H) | 14.2″ x 13″ | 330 x 360 mm | |
| Work Load Capacity | 6,250 lbs | 2,840 kg | |
| Saw Blade | Blade Size (L x T x W) | 13’6″ x 0.42″ x 1-1/4″ | 4115 x 1.1 x 34 mm |
| Blade Speed | 79-456 ft/min by Inverter | 24-139 m/min by Inverter | |
| Blade Tension | Hydraulically Controlled | ||
| Blade Control |
Top Limit Setting | Automatic Setting with Quick Approach Feeler | |
| Cutting Control | Hydraulic Pressure & Flow Control Valve | ||
| Vise Operation |
Type | Front Split Vise and Rear Vise | |
| Control | Hydraulic Full-Stroke Cylinder | ||
| Motors | Saw Blade | 5 HP | 3.7 kW |
| Hydraulic Pump | 2.0 HP | 1.5 kW | |
| Coolant System | 1/4 HP | 0.12 kW | |
| Power Requirement |
Power Supply Voltage | AC230V±10%, 3 PH, 60 Hz Required at Factory Voltage Setting |
|
| Power Requirement | |||
| Cutting Fluid |
Tank Capacity | 21 gal | 80 liters |
| Hydraulic |
Tank Capacity | 17 gal | 65 liters |
| Pressure Setting | 569 psi | 4.0 MPa (40 kgf/cm2) | |
| Chip Disposal | Chip Conveyor | ||
| Material Index |
Index Mechanism | Shuttle Vise | |
| Stroke | |||
| Length | |||
| Number of Input Block | |||
| Number of Input Station | |||
| Number of Cut-Off Pieces | |||
| Remnant Length | |||
| Machine Dimensions (W x L x H) |
Head Up Position | x 85.0″ x 80.0″ | x 2159 x 2032 mm |
| Head Down Position | x 85.0″ x 53.0″ | x 2159 x 2032 mm | |
| Table Height | 27″ | 686 mm | |
| Machine Weight | 4,200 lbs | 1950 kg | |
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.
Contact for repair and recovery of AMADA products and our corporate activities.
