Subtotal:
Menu
| Model | THV1200 | ||
|---|---|---|---|
| Body | Index Table Size | 29.5″×188.9″ | 749 x 4798 mm |
| Max Longitudinal Travel (X-axis) | 137.8″ | 3500 mm | |
| Max Cross Travel (Y&X-axis) | 23.6″ | 599 mm | |
| Distance from Spindle Nose to Table Center | 3.86″~27.4″ | 98 x 695.96 mm | |
| Distance Between Both Spindle Nose | 7.72″~54.9″ | 196 x 1394 mm | |
| Distance from Table Surface to Spindle Center | 21.2″ | 538 mm | |
| Index Table Driving Angle | 0/45/90/135 Degree | ||
| Capacity | 4 Surfaces Milling Size (W x L x H) | 9.84″-47.2″×9.84″-47.2″×9.05″ | 250- 1199 x 250-1199 x 230 mm |
| 2 Surfaces Milling Size (W x L x H) | 3.15″-47.2″×47.2″-118.1″×9.05″ | 80-1199 x 1199-2999 x 230 mm | |
| Diameter of Face Mill Cutter | Ø9.84″ | ∅250 mm | |
| Feed Speed |
Rapid Feed Speed (X-Axis) | 65.6 ft/min | 19 m/min |
| Rapid Feed Speed (Y & Z-Axis) | 39.3 ft/min | 12 m/min | |
| Cutting Feed Speed (Manual) | 0.0394″~59.1″/min | 1 – 1500 mm/min | |
| Cutting Feed Speed (Auto) | 0.0394″~196.8″/min | 1 – 5000 mm/min | |
| Handle Feed (Manual Pulse Generator) | 0.0001, 0.001, 0.01inch/1pulse | ||
| Spindle | Spindle Diameter | Equivalent to JIS No.50 | |
| Shape of Spindle Nose | Dia. 1.875″ pilot boss (for Ø9.84″ cutter) | ||
| Spindle Speed | 30 – 1000 RPM | ||
| Max Spindle Torque | 619 Nm | ||
|
Motors |
Spindle Motor (AC Spindle 30min/cont.) | 14.5/10 HP | 11/7.5 kW |
| Feed Motor (X-Axis) | 8 HP | 6.0 kW | |
| Feed Motor (Y & Z-Axis) | 5.5 HP x 2 | 4 kW x 2 | |
| Feed Motor (A-Axis) | 5.5 HP | 4.0 kW | |
| Hydraulic Unit | 9 HP | 7.0 kW | |
| Chip Conveyor | HP x 2 | 0.2 kW x 2 | |
| Lubrication Oil Pump | 1/40 HP | 0.018 kW | |
| Floor Space (W x L) | 385.8″×220.5″ | 9799 x 5600 mm | |
| Machine Weight |
Machine Weight | 50706 lb | 22999 kg |
| 4F Table Load Capacity | 5511 lb | 2499 kg | |
| 2F Table Load Capacity | 13227 lb | 5999 kg | |
| Hydraulic Tank | 26.4 gal | 99.9 liter | |
| Lubrication Oil Tank | 0.47 gal | 1.8 liter | |
| Air Pressure Requirement | 71.25psi and over, 105.66 gal./min and over | 0.5Mpa and over, 400L/min and over | |
| Electric Power Requirement | 44 kVA | ||
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.
Contact for repairand recovery of AMADA products and our corporate activities.
©2021 Amada Machinery America Inc. All Rights Reserved. Website Design and Development by Stellar Blue Technologies.
