VT4555M (8-Mark-III)

Description

VERTICAL TILT-FRAME SAW

The Worlds Most Popular Vertical Tilt-Frame

5 H.P.
1-1/4″ Blade
Marvel Series (8-Mark-III)
All-Mechanical Design
Cast Iron Construction
Metal Cutting
Large Adaptable Work Table
Semi-Automatic

Add to Quote

resources

Download Brochure & Specification Sheet

features

Front Mounted Speed Control
- Allows blade speed to be adjusted from the operator’s control station.
T-Slotted Work Table
- Work area 24.25” x 33” (616 mm x 838 mm); table height 34.5” (876 mm); four machined T-slots accept .625” (15.5 mm) T-Bolts on our VT4555. Work area 24.25” x 33” (616 mm x 838 mm); Table height 38” (965 mm); Two machined T-slots on our VT4555M.
0 – 3° Canted Column
- Adjustable 0 or 3° forward approach angle, for notching, or increased efficiency in the cutting of structural materials.
Miter Cutting
- Column and blade tilt up to 60° right and left. Optional Powered Tilt is available.
Quick Action Vice
- Maximum opening 18” (457 mm). Jaws can be shifted to either right or left side of the blade. Jaws are 6” (152 mm) high, 12” (305 mm) wide.
Automatic Stops
- Adjustable stops can be pre-set to stop advance and return of blade, and also to stop the motor at any location within the 18” (457 mm) travel of the blade.
Flushing Hose
- Washes chips from hard to get at places reducing clean-up time.
Power Chip Brush
- Together with blade wipers and flood coolant deep blade teeth free of chips.
Eagle Beak VTR Blade
- Eagle Beak VTR blade with 3/6 tooth pitch. This is the standard blade that is included with machine purchase.

specifications

Model			VT455M
Cutting Capacity (Standard Column with 3° Forward Cant)	Round (Diameter)	at 0°	17.5″	445 mm
		at 45° Right	14.5″	368 mm
		at 45° Left	13.0″	330 mm
		at 60° Right	9.7″	246 mm
		at 60° Left	7.3″	185 mm
	Rectangle (W x H)	at 0°	17.5″	445 x 558 mm
		at 45° Right	17.5″ x 14.5″	445 x 368 mm
		Rectangle at 45° Left	17.5″ x 13.0″	445 x 330 mm
		at 60° Right	17.5″ x 9.7″	445 x 246 mm
		at 60° Left	17.5″ x 7.3″	445 x 185 mm
	Maximum Vise Opening	at 45° Left	17.5″	445 mm
	Maximum Vise Opening	at 60° Left	17.5″	445 mm
Work Load Capacity			4,996 lbs	2,267 kg
Saw Blade	Dimensions (L x T x W)		15’4″ x 0.042″ x 1-1/4″	4674 x 1.1 x 34 mm
	Blade Speed		50-450 ft./min by Inverter	15-137 m/min by Inverter
	Tension Control		Pneumatic (tightening by air ratchet)
Blade Control	Cutting Control		Clutch Power Feed
Blade Control	Blade Feed Force		0 to 250 lbs	0 to 1112 N
Motors	Saw Blade		5 HP	3.7 kW
	Sawhead Fast Feed		1/4 HP	0.2 kW
	Cutting Fluid Pump		1/8 HP	0.1 kW
	Tilt Gear		1/15 HP	0.05 kW
Power Requirement	Power Supply Voltage		AC230V±10% or AC460V±10%, 3 PH, 60 Hz Voltage must be specified when ordering
Power Requirement	Power Requirement
Cutting Fluid	Tank Capacity		19.8 gal	75 liters
Cutting Fluid	Pump Type		Electric
Air Supply	Air Supply		87-145 psi	0.6-1.0 MPa
Air Supply	Air Set Pressure		80 psi	0.55 MPa
Chip Disposal			Manual
Feed Table	Feed Mechanism		NA
Feed Table	Feed Stroke		NA
Machine Dimensions (W x L x H)			94.7″ x 99.2″ x 90.8″	2404 x 2518 x 2305 mm
Table Height (Above Floor)			38.0″	965 mm
Machine Weight			2,867 lbs	1,300 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

STAY CONNECTED WITH AMADA

Contact for repairand recovery of AMADA products and our corporate activities.

Quote Request

VT4555M (8-Mark-III)

Description

VERTICAL TILT-FRAME SAW

The Worlds Most Popular Vertical Tilt-Frame

resources

Download Brochure & Specification Sheet

features

specifications

STAY CONNECTED WITH AMADA

Amada Machinery America, INC.

Products

Quick Links