Quote Request

No products in the cart.




Automatic Band Saw Created to Deliver Extraordinary
Precision with High Accurate Material Indexing

  • 7.5 HP
  • 1-1/2″ Blade
  • NC Back Gauge
  • Self Diagnostics
  • Variable Blade Speed
  • Full Stroke Vise
  • 2-Way Opening Vise
  • Remote Blade Speed Change


Download Brochure & Specification Sheet


  • Saw Head Frame
    • The rigid ‘C’ section frame carries the mountings for the two band wheels, heavy-duty worm drive gear reducer, the band drive motor, and saw guide arm mounting supports.
  • Band Wheels & Drive System
    • The band wheels are cast iron for a long, productive life. The deflection-free 9.4 inch (240 mm.) wheel hubs ensure the wheels run true regardless of tension stress or cutting loads. The spindle assemblies incorporate tapered roller bearings for greater rigidity and long service life. The wheel tracks the blade so that the back of the band contacts the wheel flanges to support the band. The drive motor is coupled to the transmission through a variable speed pulley.
  • Drive Wheel Transmission
    • The drive wheel transmission is designed and built by Amada to provide high-efficiency speed reduction, which requires no external cooling, to deliver more power to the large diameter drive hub. This hub ensures that this developed torque is transferred to the blade with no strobing, enabling the machine to efficiently cut high alloys as well as free machining materials.
  • Pressure/Flow Feed Control
    • The independent pressure and flow controls in series ensure the optimum cutting rate can be obtained regardless of section or alloy being cut. The pressure control determines the cutting force applied to the blade and the flow control sets the maximum fall rate of the head. For example, for difficult to machine materials the pressure is set higher than free machining alloys and the flow is set lower, as shown on the escutcheons above the control knobs.
  • Idler Wheel Motion Detector
    • The wheel motion detector will turn off the blade drive in the case where a blade breaks or is jammed in the workpiece. This feature also prevents premature wear on the drive wheel from a stalled band.
  • Automatic, Powered Chip Conveyor
    • The hydraulically powered chip conveyor auger automatically removes the saw chips from the saw while draining the cutting fluid back into the fluid reservoir. The automatic chip conveyor greatly reduces cleanup time and enables the machine to run longer without operator cleanup.
  • Full Stroke Vise Clamping
    • The work holding and index vise cylinders are both full stroke which eliminates the manual setting of the clamping jaw for the working width.
  • Narrow Profile Front Vise
    • The narrow front vise assembly reduces the butt end remnant to a minimum of 0.3 in. (8 mm.)


Cutting CapacityRound (Diameter)1.18″-20″30-500 mm
Rectangle (W x H)20″ x 20″500 x 500 mm
Work Load Capacity6,615 lbs3,500 kg
Saw BladeBlade Size (L x T x W)17’5″ x 0.050″ x 1-1/2″5300 x 1.3 x 41 mm
Blade Speed50-393 ft/min by Inverter15-120 m/min by Inverter
Tension Control  
Blade ControlRaised Position SettingAutomatic Setting with Quick Approach Feeler
Cutting ControlHydraulic Pressure & Flow Control Valve
Vise Operation

Type Front and Rear Vises
ControlHydraulic Full-Stroke Cylinder


Saw Blade7.5 HP5.5 kW
Hydraulic Pump2 HP1.5 kW
Cutting Fluid Pump1/4 HP0.18 kW
Power RequirementPower Supply VoltageAC220V±10%, 3 PH, 60 Hz
All Other Voltages Require Transformer
Power Requirement21kVA
Cutting FluidTank Capacity18.5 gal70 liters
Pump TypeElectric 

Tank Capacity18.5 gal70 liters
Pressure Setting498 psi3.4 MPa (35 kgf/cm2)
Chip DisposalChip Conveyor
Material Index

Index MechanismHydraulic Shuttle Type
Stroke23.62″600 mm
Length0.39-999.999″10-9999.9 mm
Number of Input Station1-99
Number of Cut-Off Pieces1-9999
Remnant Length4.9″ Plus Length of Parts125 mm Plus Length of Parts
Machine Dimensions (W x L x H)Head-Up Position100.4″ x 131.1″ x 107.1″2550 x 3330 x 2720 mm
Head Down Position100.4″ x 131.1″ x 67″2550 x 3330 x 1700 mm
Table Height31.5″800 mm
Machine Weight7,940 lbs3,600 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.


  • Roller Table 6.5′
  • Vertical Clamps
  • Vise Pressure Control 

Additional Information



Tab Title 2

Tab Title 3

Tab Title 4

Table Title 5

Request a Sample


Contact for repairand recovery of AMADA products and our corporate activities.