Subtotal:
Menu
| Model | HFA460P | |||
|---|---|---|---|---|
| Cutting Capacity | Round (Diameter) | 18″ |
460 mm |
|
| Rectangle (W x H) | 18″ x 18″ | 460 x 460 mm |
||
| Work Load Capacity | 7250 lb | 3295 kg | ||
| Saw Blade | Blade Size (L x T x W) | 17’10” x 0.052″ x 1-1/2″ | 5420 x 1.3 x 41 mm | |
| Blade Speed | 65 – 330 ft/min by Inverter | 20-100 m/min by Inverter | ||
| Tension Control | Hydraulic | |||
| Blade Control |
Top Limit Setting | Automatic Setting with Fast Approach Feeler | ||
| Cutting Control | Hydraulic Pressure & Flow Control Valve | |||
| Vise Operation |
Type |
Front and Rear Vises | ||
| Control | Hydraulic Full stroke cylinder | |||
|
Motors |
Saw Blade | 10 HP | 7.5 kW | |
| Cutting Fluid Pump | 0.25 HP | 0.18 kW | ||
| Hydraulic Pump | 2 HP | 1.5 kW | ||
|
Power Requirements |
Power Supply Voltage | AC230V +- 10% 3PH, 60Hz, Required at factory voltage setting |
||
| Cutting Fluid Pump | @@ kVA | |||
| Pressure Settings | Hydraulic | 569 PSI | 4.0 MPa | |
| Material Index | Index Mechanism | Shuttle Vise | ||
| Stroke | 19.7″ | 500 mm | ||
| Length | 0.39″ – 999″ | 10 – 25000 mm | ||
| # of Input Block | 1-100 | |||
| # of Input Station | 1-20 | |||
| # of Cut-Off Pieces | 1-999 | |||
| Remnant Length | 2.75″ plus length of parts | 70 mm plus length of parts | ||
| Fluid Capacities | Coolant | @@ gal | @@ liters | |
| Hydraulic Fluid | @@ gal | @@ liters | ||
| Machine Dimensions (W x L x H) |
Head Up Position | 109.2″ x 85.4″ x 66.4″ | 2774 x 2170 x 1686 mm | |
| Head Down Position | 109.2″ x 85.4″ x 66.4″ | 2774 x 2170 x 1686 mm | ||
| Chip Disposal | Chip Conveyor | |||
| Table Height | 29″ | 732 mm | ||
| Machine Weight | 7937 lbs | 3600 kg | ||
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.
Contact for repairand recovery of AMADA products and our corporate activities.
©2021 Amada Machinery America Inc. All Rights Reserved. Website Design and Development by Stellar Blue Technologies.
