H550EII

Download Brochure & Specification Sheet

Pressure Flow Valve
- The cutting process can be optimized just by setting up the Pressure Flow valve to the target “material, shape and size”.

Cutting Depth Setting Unit
- The blade descends horizontally. Tooling and dovetail grooving can be easily handled by adjusting a cutting end height.
Light Beam
- The light beam unit allows for easy alignment of marks. One-touch operation of the manual feeder unit moves workpieces back and forth. In addition, the user-friendly double vise system is installed to clamp materials.

Model		H550EII
Cutting Capacity	Round (Diameter)	7.87″-18.90″	200 – 480 mm
Cutting Capacity	Rectangle (W x H)	21.65″ x 18.90″	550 x 480 mm
Work Load Capacity		4,409 lbs.	2,000 kg
Saw Blade	Blade Size (L x T x W)	16′ x 0.050″ x 1.5″	4880 x 1.3 x 41 mm
	Blade Speed	56, 82, 115, 148, 180, 213, 246 ft/min	17, 25, 35, 45, 55, 65, 75, m/min
	Tension Control	Hydraulic
Blade Control	Top Limit Setting	Manual Setting
Blade Control	Cutting Control	Hydraulic Pressure & Flow Control Valve
Vise Operation	Type	Main Split Vise
Vise Operation	Control	Hydraulic Full-Stroke Cylinder
Motors	Saw Blade	7.5 HP	5.5 kW
	Hydraulic Pump	2 HP	1.5 kW
	Cutting Fluid Pump	1/2 HP	0.2 kW
Power Requirement	Power Supply Voltage	AC220V±10%, 3 PH, 60 Hz All Other Voltages Require Transformer
Power Requirement	Power Requirement	10 kVA
Cutting Fluid	Tank Capacity	21.1 gal	80 liters
Cutting Fluid	Pump Type	Electric
Hydraulic	Tank Capacity	18.5 gal	70 liters
Hydraulic	Pressure Setting	498 psi	3.5 MPa (35 kgf/cm²)
Chip Disposal		Chip Conveyor
Machine Dimensions (W x L x H)	Head-Up Position	107.2″ x 72.8″ x 80.9″	2723 x 1850 x 2055 mm
Machine Dimensions (W x L x H)	Head Down Position	107.2″ x 72.8″ x 68.7″	2723 x 1850 x 1745 mm
Table Height		26.7″	675 mm
Machine Weight		4,629 lbs	2,100 kg

Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.

Contact for repairand recovery of AMADA products and our corporate activities.