Subtotal:
Menu
| Model | H1600II | ||
|---|---|---|---|
| Cutting Capacity | Round (Diameter) | 23.62″ – 63″ | 600 – 1600 mm |
| Rectangle (W x H) | 63″ x 63″ | 1600 x 1600 mm | |
| Work Load Capacity | 88,200 lbs | 40,000 kg | |
| Saw Blade | Blade Size (L x T x W) | 50’10” x 0.063″ x 3″ | 15500 x 1.6 x 80 mm |
| Blade Speed | 39.4 – 196.8 ft/min by Inverter | 12-60 m/min by Inverter | |
| Tension Control | Hydraulic | ||
| Blade Control | Top Limit Setting | Automatic Setting with Quick Approach Feeler | |
| Cutting Control | CNC-Light, Hydraulic Flow Control Valve with Stepping Motor | ||
| Vise Operation |
Type | Single Vise | |
| Control | Hydraulic Full-Stroke Cylinder | ||
|
Motors |
Saw Blade | 20 HP | 15 kW |
| Hydraulic Pump | 7.5 HP | 5.5 kW | |
| Cutting Fluid Pump | 1/2 HP | 0.4 kW | |
| Power Requirement | Power Supply Voltage | AC220V±10%, 3 PH, 60 Hz All Other Voltages Require Transformer |
|
| Power Requirement | 35 kVA | ||
| Cutting Fluid | Tank Capacity | 92.5 gal | 350 liters |
| Pump Type | Electric | ||
| Hydraulic |
Tank Capacity | 66.1 gal | 250 liters |
| Pressure Setting | 1045 psi | 7.5 MPa (73.5 kgf/cm2) | |
| Chip Disposal | Chip Conveyor | ||
| Material Index |
Index Mechanism | Table Feed, Manual Operation | |
| Stroke | 70.9″ by Hydraulic | 1800 mm by Hydraulic | |
| Length | N/A | ||
| Number of Input Station | N/A | ||
| Number of Cut-Off Pieces | N/A | ||
| Remnant Length | N/A | ||
| Machine Dimensions (W x L x H) | Head-Up Position | 291.6″ x 192.7″ x 208.9″ | 7407 x 4895 x 5307 mm |
| Head Down Position | 291.6″ x 192.7″ x 169.8″ | 7407 x 4895 x 4314 mm | |
| Table Height | 31.9″ | 810 mm | |
| Machine Weight | 66,200 lbs | 30,000 kg | |
Specifications and the machine design may change without notice at the sole discretion of Amada’s Engineering Department.
Contact for repairand recovery of AMADA products and our corporate activities.
©2021 Amada Machinery America Inc. All Rights Reserved. Website Design and Development by Stellar Blue Technologies.
